Question about PDAs

2 Answers

My digital photo frame has power but won't turn on. I tried the reset but it didn't respond

Posted by on

  • carolemyers Jun 17, 2008

    The model #7FF2. I have held down the power button for long periods and it didn't help.
    Carole Myers


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Did you just buy this or is it one that you have had for a while that has worked before? Also what is the brand of the photo frame?

Posted on Jun 14, 2008

  • Benjamin Patri
    Benjamin Patri Jun 28, 2008

    If you are satisfied with your experience here, then feel
    free to provide me with some feedback by rating my solution. If you need any
    more help, I would be glad to assist you, just ask.



    Thanks for your time and service and I hope you have a Great Day!




×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

Can you please give the model no.

Posted on Jun 14, 2008

  • Priya darshan Jun 14, 2008

    power button must be held for 2-3 seconds before it turns on. please ensure you are holding down the
    power button long enough. Other frames have a brightness knob on the
    top of the frame, please ensure that it is not set to its minimum
    setting.

    Goodluck..


  • Priya darshan Jun 17, 2008

    Please CLICK HERE to view the user manual for your model.Once you are at the website just enter your email id. and the code shown into the box and click on download.

    Please follow the troubleshooting steps mentioned.

    If you need anymore help let us know..

    Goodluck..


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have bought this G1 from Ebay, dont know what is wrong with it. when turn on it vibrates & screen remain blueish black, I tried to Factory reset it. everytime you hard reset it, it gives...


HOpe you did the hard reset by pressing and holding home +power and then alt+w .
Does pressing and holding camera and power gives you the bootloader ( Hboot ) screen . IF yes , try reset from there .
ALso CLick HERE for more details .

Aug 06, 2011 | HTC G1

1 Answer

Can't get to booklist won't respond to touch


Hi!

You can try hitting the reset at the bottom for 3 sec. and then slide the power switch.

If the unit gets froze you can try the following:

1. Connect the reader to the AC Adapter (If available). If not, then connect the Reader via USB to the computer

2. Hit the reset button for 3 seconds.

3. The red steady light should come on, if not, try the reset again while the unit is connected

4. Allow the reader to charge for 40 Minutes (on PC make sure the computer does not go into sleep mode.

5. Disconnect the reader and see if operational.

GoodLuck!
eBookBoy
http://digialreader.freeforums.org/

Aug 04, 2011 | Sony Reader Touch PRS-600

1 Answer

The home screen is frozen it doesn't even respond to me trying to turn it off.


Hold the power button for a few seconds. If it still won't turn off, remove the batteries.

Jul 30, 2011 | PANDIGITAL Novel 7

1 Answer

How to transfer pictures from computer to sony digital photo frame


it can be transfer only by connecting the digital photo frame to the computer and select the pictures to be sented and drag it in the digital frame

Jan 23, 2011 | Acer PDAs

1 Answer

Palm is non responsive. It won't turn off.


Take the protective cover back off then try resetting it if needed. If the cover is not the right size or isn;t on in the right place it will do this. Usually it will just be one corner that gets stuck under the frame edge and then the digitizer pad thinks that you are holding down the stylus there and locks up after a while. Or it flips pages and so on.

Apr 11, 2010 | Palm Tungsten E2 Handheld

1 Answer

Vivitar digital photo frame VDF7


Select the folder you wish to show. Press enter to show the first slide then press enter again to bring up a tool strip.

Select the picture of slides to auto show the folder. You can adjust the speed in the tool box setting.

Jan 08, 2009 | PDAs

1 Answer

Cant get photos from computor to digital frame


Hi, i put the photos onto a disc, then transferred them to 13897 frame! I know it seems silly, but i was jst trying everything. Good Luck!!

Jan 01, 2009 | Sakar PDAs

2 Answers

Broken screen


The problem could be the touchscreen but, typically, with the Z22 it's more of a configuration problem. I would recommend doing a "hard reset" after syncronizing. To reset the unit to factory specs hold in the reset (in the back) and the power button simultaneously for, at least, five seconds. Instead of the Palm icon you'll see a prompt to push up on the touchpad to reset to factory defaults. Then, go through the entire setup process, including the Digitizer to initialize and calibrate the touchpad. Hopefully, that should restore the touchpad. Otherwise, well, replacing that thing yourself is NOT easy.

You can find replacements easily on eBay.

Nov 10, 2007 | Palm Z22 Handheld

4 Answers

Touchscreen no longer works


Well watch this video and after you follow the directions get the screen and find the glass like cover and remove it from the screen bend it in a very lightly way, then put it back on and put the PDA back together and BAM.

Nov 07, 2007 | Palm Tungsten E2 (Multilingual) Handheld

1 Answer

IPaq won 't respond to screen calibration.


So far no fixes. It's just been collecting dust. I think it's a screen response issue, and will probably cost more to fix than to replace (at least for me) in my situation. I'm thinking iPhone....

Jul 08, 2007 | HP iPAQ RX3115 Pocket PC

Not finding what you are looking for?
PDAs Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top PDAs Experts

kakima

Level 3 Expert

98608 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...