Question about Dyson CRO1 Front Load Washer

1 Answer

Our Dyson CRO1 front load Washer can not empty holes and complaining of coin stack in there. We have checked but there is coin in there, can you please help us?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

If your machine runs ok until this point then try giving the filter cover a gentle tap
my machine had this problem due to the pump jamming
there was nothing in the coin trap but the pump itself was jamming i fitted a replacement pump it now works ok.to open the cointrap. you will need the dyson spanner or a small flat screwdriver to lift the lock on the cover it then unscrews anticlockwise. more information can be found in the instruction manual
if you have lost or mislaid them a download is available on the dyson web site
if you are unsure how to repair your machine a call to dyson will be needed
they will repair and test your machine

Posted on Dec 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drum is not turning


Dyson Flowcheck CRO1 Front Load Washer "drum seized ...

www.fixya.com > ... > Dyson Flowcheck CRO1 Front Load Washer
Dyson Flowcheck CRO1 Front Load Washer, drum seized related issues. Get free help, solutions & advice from top Dyson experts.

Aug 08, 2015 | Dyson Memory CRO1 Front Load Washer

1 Answer

I HAVE FAULT F11 HOW DO I FIX IT


Dyson Memory CRO1 Front... Fault f11 Solutions - Fixya

www.fixya.com > ... > Dyson > Dyson Memory CRO1 Front Load Washer
Dyson Memory CRO1 Front Load Washer, fault f11 related issues. Get free help, solutions & advice from top Dyson experts.

Aug 08, 2015 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How do you remove front panel to access coin pipe hose which a blockage ?


Hi there,

Sorry to hear you're having difficulties with your Dyson Contrarotator. It's probably best if you get in touch with us directly, so one of our experts can run through some troubleshooting over the phone, and provide the information and assistance you need.

You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week. We'll look forward to hearing from you.

Kind regards,

Jack
Dyson Online Customer Support

Jul 24, 2011 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How do i open the coin flow at bottom?


push red clip up,then turn cover left.all the way round.!

Jun 21, 2010 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

Open coin trap


use side of spanner to open the circular water drain plug on coin trap, remove all water.
use flat screwdriver to lift yellow tab at top of coin trap whiloe turning coin trap anticlockwise.

Mar 05, 2009 | Dyson Memory CRO1 Front Load Washer

1 Answer

Dyson coin compartment problem


try this push red clip up THEN turn to left the coin trap window,pull pipe firmly off from inside,clean gunk out,replace pipe pointing downreplace door by aligning notches turn to right 1 complete turn,if it feels tight turning TRY AGAIN until it feels smooth to turn.

Dec 03, 2008 | Dyson Memory CRO1 Front Load Washer

1 Answer

Dyson washing machine memory modle


open both doors, on inside of inner door are 2 brass screws,
remove these and pull handle off,
to replace just squeeze locking mechanism through same hole and replace 2 screws .easy.

May 16, 2008 | Dyson Flowcheck CRO1 Front Load Washer

2 Answers

Dyson washing machine fault


Hi its Darran at Dyson. If you paid for a repair then there is a 12 month guarantee on any work that was carried out. To arrange a visit, please contact our Helpline on 0800 298 0298, between the hours of 7am - 10pm, 7 days a week.

Kind regards
Darran
Dyson Customer Service

Mar 26, 2008 | Dyson Flowcheck CRO1 Front Load Washer

Not finding what you are looking for?
Dyson CRO1 Front Load Washer Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Washing Machines Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1031 Answers

Brad Brown

Level 3 Expert

17446 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Dyson Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...