Question about ViewSonic N2700W 27 in. HD-Ready LCD Television

1 Answer

ViewSonic N2700 Blinking power button

I recently got a ViewSonic flat screen from a friend that had, up until I received it, worked great. However, when I hooked it up at my place the the power button would light up but the screen wouldn't turn on. After messing with the power hook-ups a bit the TV turned on, however, it wouldn't turn off.
Finally I unplugged the TV to get it to turn off, but now when I plug it in the power button just blinks. I don't get audio or visual, just a blinking power button. Help!

Posted by on

  • 2 more comments 
  • Halplx Jun 17, 2008

    Bump, still isn't working :(

  • mjotti Jul 10, 2008

    my tv was working fine 4 hours ago...  then when turning it on the next day -- blinking blue power light.  the light will go solid but no picture or sound.  I have tried different inputs with no change in problem.  I removed the tv tuner box -- no change.

  • CKOCER Sep 02, 2008

    I HAVE THE SAME PROBLEM, DOES ANYONE FIED THEIRS AND HOW?

    IS THE POWER SUPPLY REALLY THE PROBLEM? NOT THE AC ADAPTER RIGHT?

    PLEASE CONTACT ME AT CKOCER@CHARTER.NET IF YOU HAVE A SOLUTION

  • LogOnFixIt Jan 25, 2009

    I have the same problem, it comes on for a half a secomd then goes blank. If i shine a light on the screen i can faintly see the menus. I replaced the power supply Twice once used and that didnt help so I bought a new power supply and the problem still the same, Loved it when it was working..  any hekp out there?
    Michael

×

1 Answer

Replace the power supply, buy it on the internet by looking up the model number on the power supply. I have this tv and it did this until I ordered a new one. it runs hot and has a loud fan.

Posted on Jul 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung 50 Plasma TV- No picture but sound works.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jun 01, 2016 | Samsung 50 in. Plasma TV

1 Answer

My 4.4 dish network remote codes listed for viewsonic hdtv do not work,I have tried:507,551,562,566,575,583,600,752,760,796 ( 606would not program into remote)


Hi there TonyMichael, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you and provide you with information that can help program your remote to your television. The codes we have listed for a Viewsonic Tv to be programmed with a 4.4 IR/UHF Pro remote are: 566, 505, and 760.
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at kimberly.escobar@dish.com!

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.


Kimberly. Escobar
Social Media Representative
DISH L.L.C

Oct 11, 2013 | ViewSonic N2630w 26 in. LCD TV

2 Answers

Ok i have a viewsonic hdmi problem 27in red light blinking how to fix it


I have the same unit. Mine does not have audio, I'm told I need a Scaller Board (audio). Which cost $$$$.
I could use the stand if you part it out. Thanks

May 17, 2010 | ViewSonic N2751W 27 in. LCD Television

1 Answer

Viewsonic N2750w flashing different colors on screen


did you get any answers? I have the same problem.

Jul 06, 2009 | Televison & Video

1 Answer

Comcast remote code for 32" viewsonic


11755
  1. Turn on your device (i.e. TV).
  2. PRESS the button for the device you want to program (TV, VCR, CABLE, AUD, etc.) then RELEASE.
  3. PRESS and HOLD the SETUP button until the red LED for the selected device flashes twice, then RELEASE.
  4. ENTER the 5 digit code for your brand from the list above.
  5. You should receive 2 quick flashes on the LED for the selected device after entering your code.
  6. PRESS the POWER button to test the code. (On VCR,LD,and CD players use PLAY)

Jun 16, 2009 | ViewSonic NextVision N3260W 32 in....

1 Answer

I have a Viewsonic flat-screen tv, it displays "menu locked" ??


Try holding the VOL + and VOL - buttons on the TV (not on the remote) down together. You should see a "unlocking buttons" message on screen. This might work. However, I tried it repeatedly, as told to by the Viewsonic "service" rep, and it didn't work for me. Viewsonic is ****, and so is its "service"!

Jun 06, 2009 | ViewSonic N3251w 32 in. LCD HDTV

1 Answer

VIEWSONIC N2750 LCD KEEPS BLINKING ON AND OFF ITS LIKE THE LIGHT WANTS TO BURN.PLEASE HELP


I had a problem with mine and opened it up and found a power connector that had overheated and was not making good contact. This is a four prong white plastic connector and I think the power draw is high enough that it overheats if it isn't making great connection. I removed the connector and soldered the wires and solved problem

Feb 21, 2009 | ViewSonic N2700W 27 in. HD-Ready LCD...

1 Answer

N2750W PROBLEMS WITH DIRECT TV


just press the "PIP" button on the remote it happened to me and i just thought that it looked familiar and i pressed it and it worked hope it helps :)

Nov 19, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Powering up and warmup problems


why does my lcd monitor change different colors no picture just turns to all sort of colors ViewSonic N2751W 27 in. LCD Television thanks 4 your help

Dec 05, 2007 | ViewSonic N2751W 27 in. LCD Television

5 Answers

Viewsonic n2751w


why does my 27 inch lcd monitor keep changing colors

Oct 18, 2007 | ViewSonic N2751W 27 in. LCD Television

Not finding what you are looking for?
ViewSonic N2700W 27 in. HD-Ready LCD Television Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

4808 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...