Question about Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
I have a Canon Powershot A 630. Worked fine till now. I can not take pictures,because my flash is blinking in the screen. When i turn off the flash than i can take pictures. The batteries are ok.
Right now Canon's support section for their website is down.
What I'm looking for is to see if the flash was turned off by the control panel accidently. Most digital have a setting to turn it off.
Typically if the camera needs a flash and can't give you one you will get a warning message on the screen. If thats whats happening, then the sensor is working.
Sometimes weak batteries will cause the flash not to work because there may be enought current to run the screen and the shutter but not enough to run the flash at the same time. If you say the batteries are fine then that probably isn't the case.
If you have the book handy you might want to check the control panel settings and find the flash controls.
Posted on Jun 16, 2008
Tips for a great answer:
Jul 20, 2011 | Canon PowerShot A720 IS Digital Camera
Apr 05, 2010 | Canon PowerShot SD870 IS Digital Camera
Feb 23, 2010 | Canon PowerShot A540 Digital Camera
Dec 14, 2008 | Canon PowerShot SD630 Digital ELPH / IXUS...
Nov 15, 2008 | Canon PowerShot A60 Digital Camera
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: