Question about GE 29273GE2 Phone

2 Answers

29273GE2-A Dumb question, but here it is -- does this phone require batteries? My caller ID is blank.

Posted by on

2 Answers

Here is more information:

your phone uses 4 AA-size alkaline batteries for receiving and storing caller ID records and for the numbers you use for memory dialing. Heres how to install:

1) remove the telephone wire and the curly handset wire from the "bottom base"

2) push down on the button which is located on the handset "cradle", (button located where the bottom of the handset rests)

3) pull apart the "cradle" from the "bottom base", and now you see the hidden battery compartment

on mine the "bottom base" is two colors (black and gray) and the" cradle" is just one color (black)

Posted on Jul 10, 2008

Yes this phone requires batteries, i think its double A, but check to make sure

Posted on Jul 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have caller ID service for our business account and our phone has a Caller ID button, but it doesn't seem to work?


I you're running on a CiX or CTX platform, you're dealer or system administrator needs to enter the amount of CID calls to be buffered on that particular phone. This can only be done via the System Administration Program.

Sep 17, 2014 | Toshiba DKT3020SD Corded Phone

1 Answer

CD 1281 vtech phone have battery for caller ID


Caller Id is set by the provider of the phone service, it has nothing to do with any separate battery. Why are you asking?

Jul 18, 2014 | Vtech Phones

1 Answer

How do you get caller ID to work so I can see who is calling from a outside line before I answer?


Caller ID requires a class trunk card in the phone system and having your Telco provider sending Caller ID.

Feb 05, 2013 | NorStar M7324 Corded Phone

1 Answer

CANT GET CALLER ID TO WORK ON NORSTAR M7310 PHONE IS IT CAPABLE


This feature requires a class trunk card in the phone system to pass Caller ID.

Jan 17, 2013 | NorStar M7310 Corded Phone

1 Answer

No caller ID. TP company says I have service.


  • Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .

  • Is the battery old? - Replace the battery.

  • Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.

  • Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.

  • Do you have Caller ID service with your telephone company - In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. If the Caller ID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.

  • Caller ID shows up after second ring - Be sure to wait until the second ring before answering. Caller ID signals comes through after the first ring, if caller pick ups phone too soon Caller ID signal will not be transmitted to the handset.

  • Confirm that caller ID is still working on that particular line by checking another phone on the same line - If Caller ID is not coming through contact your phone company provider.

If this does not fix your problem, contact your authorized Service Center.*

Oct 16, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

StarTalk Flash is 1.7.00 + caller ID


The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

Mar 24, 2010 | NorStar M7310 Corded Phone

2 Answers

AT&T 974 Caller ID has quit.


Unplug everything then replug should reset the Caller ID

Dec 11, 2009 | AT&T ATT-974 Corded Phone

1 Answer

No ID caller displayed on the phone


Is the phone FCC approved for use in the US? Does the model purchased in Singapore use the same Caller ID algorithm as US phones? Have you tested a known good caller ID capable phone at your location to make absolutely sure the caller ID is actually turned on?

Mar 09, 2009 | Panasonic KX-TG5632 Phone

1 Answer

Caller id dont work


just connect one end of the phone plug to the id caller,then connect the outlet of the caller id and fix it to phone...........even then if u hav problem, may be ur caller id doesn.t hav batteries..............otherwise u may hav some problem in the id caller socket where phone plugs r inserted................

Sep 08, 2008 | Radio Shack 433575 Cordless Phone

1 Answer

Caller ID Stopped Working - Think the phone needs to be reset?


Not sure why this worked, but I went to the Menu and the Set Area Code selection. The area code setting was blank, so I entered my area code and saved it. Caller ID started to work again. As a test, I went back to the Set Area Code selection and deleted the area code and saved it. It is currently still working. Seems really odd, but it worked for me.

Jan 08, 2008 | RCA 25414RE3 Corded Phone

Not finding what you are looking for?
GE 29273GE2 Phone Logo

Related Topics:

587 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96396 Answers

Cindy Wells

Level 3 Expert

4754 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...