Question about Philips Projection Televisions
That you have to " smack it " could mean that a cold solder joint on the board proberly out of the vertercial output. To test, while the TV is on use a long plastic or wood tool and push on the board. Sometimes you may have "resolder" EVERY joint, ground, wire connection in that circuit.
Posted on Jun 14, 2008
Tips for a great answer:
Apr 25, 2012 | RCA P55000 55" Rear Projection Television
May 13, 2009 | Panasonic PT-52LCX65 44" HDTV
Apr 19, 2009 | Projection Televisions
Nov 28, 2007 | Mitsubishi WD-73732 73" Television
Usually consumer described bowing is bad solder connects
on pins of convergence IC's. If the effort is made to pull the center PC board out,then replace both Stk392-570 IC's for
Note: V-Pin amp and pin out relates to left/right side bowed-in
issues,a problem not usually found on your model.
Aug 30, 2007 | Mitsubishi WS-55908 55" Rear Projection...
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: