Http://geeksquad.fixya.com/ThreadView.aspx?prdid=12164&thid=669867 Eureka Wide Track Superlite Posted by mjtnm on Jun 14, 2008 The brush motor went out. Is it possible to buy one and splice it to the existing wires? Where can I buy one? The vacuum is model #409 the number on the dead motor is: DA-20L-2001, 17.5V DC AOM 4293S Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Eureka 421A EZ Kleen Bagless Stick Vacuum. Yes, you can replace the power nozzle motor in the head of the Eureka 421A EZ Kleen Bagless Stick Vacuum by either contacting the local vacuum cleaner dealer in your area or to contact the Eureka factory and ask for cust servor tech support or parts and they will direct you to the correct dept to order the P/N motor so that you can install it and get on with your cleaning. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. http://www.eureka.comCustomer Service1-800-282-2886 Customer Service Dept Electrolux Home Care Products P.O. Box 3900 Peoria. IL61612 Hours of Operation Monday thru Friday 8:00am to 7:30pm CST Saturday and Sunday 10:00am to 6:30pm CST Thanks, Don the Vac Man Go Ahead. Use Us.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Today sadly to say it is common for most vacuums. The quality is so poor that the roller brushes don't last long and can burn up belts as fast as you can replace them. Next time you want to buy a vacuum, turn it up side down and see what the roller brush is made of. If is is steel then buy it, if it is wooden or plastic forget it.
I had this same problem. The brush roll wouldn't spin, smoke came out, and it smelled like burning rubber. I changed the belt thinking that would fix the problem but it didn't, so I took the belt back off and checked the motor shaft in the back and found a whole bunch of hair wrapped around the shaft. Once I cut out the hair with some scissors and replaced the belt, everything worked like normal. I hope this helps.
Check two things with this model: if the top slider button has been activated it will turn the brush roll on. If not then you'll have to remove the sole plate and check the sides of the beater bar - sometimes this will get jammed and refuse to turn because clogging of dust or tangled hair/carpet thread takes up the thread wheels at the sides. Sadly this model has a permanent toothed drive belt that can't really be replaced by the owner. However check the slider control on the top of the main body / handle first before doing anything - as you know it has a two option slider - switching on without the brush roll function and switching on with the brush roll activated.
http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=552328 Generic problem for all Vacuums I changed the belt on Posted by hiphoppy69 on Apr 28, 2008
I changed the belt on a Eureka Whirlwind superlite, all was well but I can't seem to find where this white piece of plastic approx.2" and less than 1/2" wide and there is a copper like V shaped clip, I was hoping maybe you had a diagram or something showing where these go. Much Appreciated
Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. I would suggest contacting your local vac dealer in your area to she id they have a schematic of the Eureka Whirlwind Superlite vacuum, and include the model number so that it would be easier to find the vacuum you are speaking of or you also can check on line, some factory manufacturer have some type of schematics that you can download using the name and model # of the vacuum, but this is not a guarantee, So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. http://www.eureka.comCustomer Service Phone Number 1-800-282-2886Hours of Operation Monday thru Friday 8:00 am to 7:30 pm CST Saturday and Sunday 10:00 am to 6:30 pm CST Thanks,Don – The Vac Man Go Ahead.Use Us.
The top comes off to get to the belt and brush roll. Did you check the brush roll to make sure that the ends turn freely, or is one not turning, the belt is a lon life "U" part #61120A. The brush roll is what drives the vacuum, but if brush roll or belt is bad, then it won't drive it.