Question about Logitech EXTREME 3D PRO TWIST HANDLE JOYSTICK USB (VG3DPROTWISTJOYSTICKUSB)

1 Answer

BF2 problem

When I play BF2, the horizontal and twist directions are reversed during heli/air.

I have tried re-assigning keys in both directions, but nothing seems to correct the problem. Any ideas?

Thanks,

~Bri

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Recent v1.5 patch install? Assuming this, go to your BF2 Controls, you'll notice a Falcon column to the right of the regular stick assignments... highlite any control in this column which has a preset Falcon assignment, and press Escape to delete all of them. This worked for my Extreme 3D Pro, which had the same problem that you described. I found this solution from another site, so thanks to that gamer for the fix.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The T-turn is reversed


I my mind the actual lock bolt was assembled wrong. You need to gently twist the length adjusting unit /bolt directly out of its housing and then gentle separate the two pieces though fully separating them and then "flip" the actual little toggling metal piece that has the "U shaped and half circle looking hub that the lock shaft slides into, around from it currently position ... ie. reversing its throw. You may need to also adjust the spring metal piece underneath it as it run in a slot as well.
This worked for me ... when t-turn key is horizontal the dead bolt is extended ie. in locked position.

Apr 27, 2013 | Weiser Lock ED1460X3VKD Powerbolt 1000...

1 Answer

What does CD key not valid mean


you need to register the game with a valid serial number,it's included when you buy the game's DVD
when you install the game,normally the installer will ask you to enter a serial number
i don't recommend you to crack the game,but still it worth to try

Aug 24, 2012 | Computers & Internet

1 Answer

My 9053 lifts off fine goes left right and reverse. but it goes reverse also when i want to go forward . Tail rotor turns at what appears proper rpm. and it changes direction when i push stick from reverse...


I own this heli also. The problem is that the tail rotor does not apply enough push to tilt the heli forward. It is this forward pitch that moves the heli forward. Aside form buying a stronger tail motor, upgrading your battery etc, the only thing you can do id this:

Get a credit card, a pair of scissors and some tape. Cut a couple of strips from the credit card about 2 1/2 - 3 times wider thhan the tail rotor blades and the same length. Now tape the strips to the top of the tail rotor blades. Make sure you don't increase the length.

This will help a little by providing more air push when the tail rotor in engaged. Without some serious modding, this heli will never be great.

I have more fun flying my micro size syma helicopter in the garage then I have flying my volitation. If there is even the slightest breeze, the volitation will float in the direction of the breeze and will not fly against it.

Apr 03, 2011 | xheli 9053 Outdoor Volitation Metal...

1 Answer

Need charging instructions for Air Hogs Havoc heli. Is remote control switch to be turned on during charging? What position is channel switch in? Is Heli on/off switch set to charge? I have no...


1.Take out charging wires. 2.turn off your heli and insert charging socket into your heli's socket. 3.the charging green light will light up while charging. 4.charging complete, the green light will turn off. 5.pull out the wires and you are ready to fly. Let the heli's battery cool down for approx. 15 minutes before charging.

Feb 19, 2010 | Spinmaster Air Hogs Battling Havoc R/C...

2 Answers

How do i fly my spin master air hog rc helicopter all it does is go in circles


If you trimmed your heli but it still can't work, try using the direction knob to trim it instead. When it goes clockwise push th knob leftwards and hold, and vise versa for anti-clockwise. Or, push and release repeatedly in the direction mentioned till it flies straight. Tested on around 6 air hogs helis and works each time. If you still can't trim you might try it after turning it off or contact the service centre.

Feb 05, 2010 | Spinmaster Air Hogs RC Reflex Micro...

1 Answer

Air hog havoc goes up and down just fine, no steering control


The steering control only makes the copter rotate.

But if the heli is properly balanced a right turn should get you some forward motion. A left turn should just make it spin back to the left.

Adding weight to the front of the copter will give it continuous forward motion. Then you will lose the ability to hover.

If you visit the Air Hogs website (www.airhogs.com), select "need help" and then Havoc Heli, then crash course, the video will show you how it works.

I also find that climbing makes the heli spin left and descending makes it spin right. So full right for initial startup, then a little right when climbing, and a little left when descending helps to smooth things out.

Keep in mind that this is a very small and cheap helicopter. It took me a while to get used to flying in circles to the right but with practice I have been able to get it to go somewhat where I want it to. I can take off and land from the coffee table without crashing.

Jan 15, 2010 | Air Hogs Havoc Heli Helicopters

1 Answer

Bf2 crashs to the desktop wheni have enterd a game


Most BF2 crashes to desktop have to do with Memory problems as it tends to be VERY memory intensive so checking out your memory with memtest86 (or upgrading to more memory) might be a good first step.

Alternatively here is a BF2 troubleshooting guide:

http://www.tweakguides.com/BF2_3.html

Jun 21, 2009 | Electronic Arts Battlefield 2 for Windows

2 Answers

Crashed blade 400 repaired it unsure of servo settings helicopter tilts forward and tends to spin around


Try setting gain on Gyro (use small plastic screwdriver) to a straight up and down position.

Set Gyro setting in Transmitter to 75%. NOTE: before turning on helicopter, be sure to center all adjustments on transmitter

Side switch on GYRO to DS and make sure the servo is moving in correct direction. If not. reverse direction with switch on side of Gyro. You may need to reverse the controller of Rudder in settings on transmitter.

This worked for me on my Blade and using the same Gyro on a self build 450 heli.

Good luck!

Helimangler


Apr 20, 2009 | E-Flite Blade 400 3D RTF Electric Mini...

3 Answers

I bought Battlefield 1942, 2, and 2142 and product keys were lost


well if you have registered the game...
you should contact EA they will give you all the product keys..!!
if not you will have to use keys which are blacklisted by EA...!!

Jan 27, 2009 | Electronic Arts Battlefield 1942 The...

1 Answer

Nephew lost directions for charging


make sure both heli and controller are off and batteries are new and then plug wire into heli and then turn controller on it doesnt matter abc, abc is just the frequency to controll heli just match with the letter under the heli

Jan 04, 2009 | Air Hogs Havoc Heli Helicopters

Not finding what you are looking for?

Open Questions:

Logitech EXTREME 3D PRO TWIST HANDLE JOYSTICK USB (VG3DPROTWISTJOYSTICKUSB) Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Video Game Consoles & Games Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Rob boss

Level 1 Expert

2 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Logitech Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...