- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I plugged it to my computer and when it connected I pressed and held the m button for about 10 seconds and then i unplugged it from the computer and turned it on and now it dont freeze on my 3rd song! I had 20 songs on there but i couldnt move from the 3rd song! I couldnt go back or forward to the next song before i tried this method! I hope this helps!!
After you select "All Songs" you're saying that it simply shows the previous song that was played and starts that one right?
A couple of things, normally the unit doesn't play anything by default when turned on. Usually it will allow you to select from the menu and if you don't make a selection at this point and attempt to back up, sometimes it will start playing the last song used.
Here's a couple of work arounds, first, you can try to use the smaller silver button (above left of large dial), press it and move the menu back to your options or choices such as Artists, Playlists, etc. and select something different that way (this is while the current song is playing).
Another possible solution is to select from the menu either "Artists" or "Browser" and choose another file.
This unit can demonstrate weird behavior at times and like anything else, the more you mess around with it, the more you'll figure out its quirks.
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
First make sure your hold switch isn't on. It's on the top or bottom and slides
back and forth. It needs to be switched to the left. Once it is to the
left, here's how you reset:
You can reset your ipod by holding down the menu and select (round
button in the center) buttons down for at least 10 seconds. You'll see
an apple logo flash, that's when you stop pressing the buttons. It will
shut off, then back on.
. How to reset Zen v + http://www.youtube.com/watch?v=22T_gkkZjmM&feature=related Zen Vision:M Not Responding SOLUTION! to No Charge, Device Not Connected or Recognize http://www.anythingbutipod.com/forum/showthread.php?t=10960 If that doesn't fix it trythe USB cable