No power to Canon Pixma ip6000d

Try update drivers for your Canon:
http://filedir.com/download/company_canon/ip6000d:251/

Try removing the printhead before powering up, after that you need either a new power supply or main logic pcb.

If you can take out the printhead it might power up, sometimes that is caused by a bad printhead. If not that light indicates a bad main logic board and it's cheaper to buy a new printer.

The 6500 error code is a logic board error code. Sounds like it needs new logic board assembly.

20 times Other hardware error [6500] - Logic board ***'y (QM2-2670)*1

Its the small circuit board next to the carriage unit

You can get one for about $30 from this company web site.

www.euro-parts.it/download/slowmover_oct-2008.xls

You probably have to contact them directly to get your exact circuit board.

This is what I found from a service manual: AP position error [6A00] - Sheet feed unit (QM2-1220) - Logic board ***'y (QM2-1786)*1
What does it mean? This link should be useful: http://www.fixyourownprinter.com/forums/inkjet/37440

There is a prblem with the carriage lift mechanism.
Probale causes
1.PR Lift shaft assembly
2.Sheet Feed Unit
3.Logic Board
Only your local Canon Dealer will know for sure!

I am sorry to inform you that I dont have any idea how much it will cost in your area

might be the powersupply unit of the printer is damaged, send the printer for repair

here u can choice :

http://www.google.com/search?hl=en&q=download+canon+PIXMA+ip6000D+driver

and rate this solution as SOLVED if u got help please?