Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

2 Answers

Whirlpool Ultimate Care II washer

I fill my washer and start it to washing and the dial does not move and I have to move it and turn it to rinse and then to spin. I have to babysit it but I can get it through a cycle.

Thanks

Posted by on

  • Anonymous Jun 21, 2008

    My washer has a similar problem. Water fills but the spin cycle does not start. I have to either shake the waher or pull and push the knob several times before it starts to spin. Changed timer and knob but it did not help.

    Problem started after movers move it to my new home.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace timer. Works good as new.

Thanks guys

Posted on Jun 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 246 Answers

If it will perform all of the functions if you turn your timer knob manually, I would open the console and check for any loose connections, although from your description your timer motor has gone bad (only availible as the whole timer) It can be purchased from online from the manufacture or from a local parts store.

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer stopping mid-cycle


Push down on lid. You may have a bad lid switch. Start machine and press the switch down with something like a screwdriver and see if the motor runs.

Jul 01, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer stopped after wash cycle


The lid switch is the culprit. Push down on the lid it should start. It needs to be adjusted . the tab on the lid is not activating the switch. Try triming the door bumpers.

Apr 10, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate Care II


sounds like a broken coupling.
it probably don't agitate either.

Oct 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool ultimate care II keeps filling flooding the garage. It will not move off the fill position on the little turn dial. we manually move the dial to try to get it to agitate and the only spot it will...


A couple questions.

Does it continue to fill with the timer turned off.
Yes, you have a mixing valve problem
No. You probably have a pressure switch problem,

I would guess its the pressure switch, check to make sure the hose running from the outer tub to the pressure switch has a cut in it and needs to be replaced, or the pressure switch is bad.

If you are uncomfortable trying to find problem call a service tech.

Jul 12, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Will not run or drain


My wash machine doesn't open from the front but I am having problems with it not draining

Apr 14, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...