Replacement fan blade for fan

Most have a one-time thermal fuse wired into the motor. You would have to remove cage and fan blade, unscrew motor mounts, open motor casing, locate fuse by cutting open or sliding off the thermal sleeves, cut fuse out and resolder a new thermal fuse in. Should be able to locate replacement thermal fuse online. Can also just splice ends together but then you lose thermal protection and a fire can result. It is a good temporary fix to diagnose if you have burnt out one of the motor coils.

u can get a replace blade from hard wares and fan shops also try ebay and oztion

get help from expect

CTG ' Order 1010MP from PATTON ELECTRIC CO INC Now from CTG !

It looks like you can purchase a motor here.
Make sure you have the correct data from your motor.
There is also a contact button so you can probably call, too.

Good Luck,
Your FixYa Texpert,
Gary

I'm not all up on Patton Model#s, but this is an older unit, correct? You may try contacting Patton (Owned by Holmes now so you may have to go through them)

If they cannot help you, try www.dtvintagefans.org There's collectors there that may have parts fans that they may be willing to sell a blade.

Alternatively, you may try Grainger, as they sell an assortment of blades. You will need to match a blade to your motor though, which should be fairly easy as the Patton fans use a common McMillan motor which most attic fans also use.

it would be far cheaper and more easy to replace the entire unit

Try McMaster Carr -- page 640, Fans and Fan Blades.

http://www.mcmaster.com/#ventilation-fans/=8qgdv5

i have a good blade for model #u2-1887.

I have a metal blade for the Patton U2-20 fan listed on ebay. The item number is 160273949463 and the listing ends on Wednesday August 27 at 10.00 p.m. I had this fan for 8 years and the motor has failed. Patton could not replace the motor since this is a discontinued item, and I figured that someone could use another blade for their fan. I hope this helps you!

I just want to know if I can purchase a NEW motor and what the cost is?