Question about Belkin (F5D5231-4) Router

1 Answer

WIFI PHONE NOT RECOGNISING BELKIN WIRELSS ROUTER

I have a Belkin N1 wireless router for my LAN and wireless network with 2 laptops connected & working fine.
However I cannot get my UTSTAR WIFI phone to recognise the router as an access point . I accessed the router settings and removed all security temporarily making it an open AP and still it didnt connect.
ANY other suggestions?
Albert
avkceo@avknowles.com

Posted by on

  • Dave May 11, 2010

    what model phone do you have?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

The router is not configured by default as an access point.
to use the phone the router must be configured as an access point, which is more than disabling security, nat and dhcp must be removed..
page 53 of the user manual describes the proceedure.
online the manual is here
http://belkin.httpsvc.vitalstreamcdn.com/belkin_vitalstream_com/support/dl/p75170-d_f5d8231-4_man.pdf

Posted on Jul 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin N1 Wireless ADSL2 Model # F5D8631-4 Router router default address (192.168.2.1) is not opening, even i have reset the router


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 09, 2012 | Belkin Routers

1 Answer

I would like to WIFI my phone but have forgotten the password on my Belkin how do I find it or reset it.


Connect a LAN cable from Belkin to yourlaptop/computer's LAN port, open a browser on your laptop/computer and enterthe Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 27, 2011 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

How do I hook up a router, I have wireless internet already


If you have wireless internet already, then go to Belkin's website. Most electronic devices nowadays have manuals in PDF format on their websites. Different router manufacturers usually has a different setup protocol for their devices.

Feb 28, 2011 | Belkin Basic Wireless Router

1 Answer

My Belkin n1 router disconnects from telstra every 2 hours - exac


This is a known problem with the Belkin N1 Vision Modem Router. The router keeps time by connecting to a Simple Network Time Protocol (SNTP) server every 2 hours. The solution is to go to www.belkin.com and download and install the pre-release firmware which is supposed to fix "A problem where the router could drop some connections on 2-hour intervals" among other things.

Sep 14, 2009 | Belkin N1 Vision Wireless Router

1 Answer

Belkin N1 Wireless router wont fully connect to laptop


if you connect your xbox and it works than it is not your isp

go to your network setup and try it with fix ip and DNS to you vista laptop wirless card /fixed card ip setup

goodl luck get back if this does not work with more info on your network setup

Jun 12, 2009 | Belkin (F5D8231-4) Wireless Router...

2 Answers

Belkin N1 wireless network not working


It might be an idea to upgrade the firmware which can be downloaded from manufacturers' website

Mar 20, 2009 | Belkin N1 Vision Wireless Router

3 Answers

Wireless connection


Access the routers admin page with the hardwired pc.  http://*gateway*  right click network status on pc and get gateway.  Google the model you have for the default passwords.  Setup your wifi security then do the same to your laptop and attempt to connect again.  Bad settings somewhere.
James Mac

Sep 09, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Using 2 routers


You may use your wireless router as an Access Point:

1. Connect one of the LAN port of the Belkin to a LAN port on your Voyager. If the link light on both side are not coming on, try using a cross-over cable. Important: Do not connect anything to the WAN port of your Belkin.

2. Configure the LAN IP address of your Belkin in the same subnet as the Voyager. By example, if your Voyager has 192.168.0.1, you may give your Belkin 192.168.0.3.

3. Disable the DHCP server on the Belkin since the Voyager most likely already has one.

4. Configure the Wireless parameter of your Belkin as you would normaly do.

Using this method, your wired and wireless devices will be able to communicate together since they will be on the same network and your Belkin will act as a bridge between the wired and wireless network.

Apr 20, 2008 | Belkin (F5D7231-4) Wireless Router

1 Answer

Wireless connection from my laptop.


Right click on the network icon in your task bar and click view wireless networks, then when all the networks show delete them all and close the window, next, a pop up will say found wirelss connections click the icon again and look for your connection in the list and click connect and enter the pass phrase

Nov 05, 2007 | Belkin (F5D9230-4) Wireless Router...

1 Answer

Wireless router belkin n1


Right click on the network icon in your task bar and click view wireless networks, then when all the networks show delete them all and close the window, next, a pop up will say found wireless connections click the icon again and look for your connection in the list and click connect and enter the pass phrase

Nov 05, 2007 | Belkin (F5D8231-4) Wireless Router...

Not finding what you are looking for?
Belkin (F5D5231-4) Router Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...