Question about Mackie 1202vlz3 12 Channel Mixer

1 Answer

How can I connect my mackie mixer 1202-vlz3 to my mac mini

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,066 Answers

Use the xlr (3 prong) main left and right outputs of the board. get xlr to 1/4 inch cables. one end will be 3 prong, to plug into the mixer, then the other end will be a mono 1/4 inch plug, like a big headphone plug. Then you have to get a dual mono 1/4 inch to stereo 1/8 inch adapter and plug it noto the line in. if there is no lone in, but a microphone jack instead, you will get a mono signal instead of a stereo signal. in this case, just use 1 channel of the mixer, instead of both of the stereo outs, and use a single mono 1/4 inch to mono 1/8 inch adapter.

the xlr to 1/4 inch cables can be purchased at a music store. the 1/4 inch to 1/8 inch adapters will probably need to be purchased at radio shack.

Posted on Nov 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mackie VLZ3 3204


You waited six years to bring this up?

Feb 04, 2018 | Mackie 3204-VLZ3 Mixer

1 Answer

How do I hook up two powered 15's and two passive 15's to this mixer(1202-VLZ3)?


You connect the powered 15's using balanced cables. The passive speakers you will have to get an amplifier for as the mixer does NOT have a powered output, only line-level audio outputs.
The powered speakers MAY have audio line level outputs to continue to other powered speakers or, as in your case, external amplifiers to drive your passive speakers.
Remember to power ALL interconnected equipment from the same receptacle or source to avoid ground bounce faults that can destroy sensitive circuits in your equipment.

Mar 05, 2011 | Mackie 1202vlz3 12 Channel Mixer

1 Answer

What exactly do I need to connect a Mackie 402-VLZ3 to a Macbook Pro ? Where can I buy the cables? Thanks!


The internal audio systems in the PC's are inadequate for high quality work. You should get an external audio system that attaches via firewire or USB to your MAC. Then use balanced cables from the mixer to this audio interface. There are MANY different audio interfaces... Search the music equipment suppliers in the "recording" section of their catalog...

Feb 10, 2011 | Mackie 1202vlz3 12 Channel Mixer

1 Answer

Type pf op amp in a Behringer XENYX 1204USB Mixer and a Mackie - 1202-VLZ3


Behringer uses 4580's in appropriate packaging everywhere. There are 339 comparators for the level indicator area.

The Mackies uses both NJM2068 and NJM4560M

The 2068' are used in most of the low noise areas and the 4560 is used in the 75Hz high pass filter for example.

Jul 22, 2010 | Behringer Xenyx 1002fx Mixer 10 Input 2...

1 Answer

Computer->M-Audio-FastTrackPro USB->trs outputs 1/2->linein 11-12 of mackie 1202-vlz3. How can i get stereo sound out of the mackie?


Use TRS to TRS balanced cables from the M Audio to the line in 11 and 12.

Set the pan controls for the 11 and 12 to opposite directions to split the stereo to left and right main outputs. (otherwise both main outs mix the left and right and you get mono result.

Feb 05, 2010 | Mackie 1202vlz3 12 Channel Mixer

1 Answer

Hooking up powerd monitors to a Mackie 1604 VLZ3


Are you sending the main mix to the monitors or are you giving them their own mix? What about using the sub groups, use 1 for your monitor send.

Apr 04, 2009 | Mackie 1604 Vlz3 16 Channel Mixer

Not finding what you are looking for?
Mackie 1202vlz3 12 Channel Mixer Logo

Related Topics:

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mackie Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Lawrence Nentwig
Lawrence Nentwig

Level 1 Expert

11 Answers

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Are you a Mackie Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...