1. Go to My Computer >> Manage and click Device Manager in the left tab.
2. Click Portable Devices >> Apple iPhone >> Uninstall
3.
Unplug and plug your iPhone, now wait for windows to re recognize your
iphone [ In Device Manager, you will see the new recognized Apple Iphone
]
4. Press F5 to refresh your windows explorer and your Apple iPhone will show up with a camera icon.
If for some reason none of the above methods work, but you want to copy camera
taken pictures but there was no way to do it.
Follow the procedure to do the same, make sure that your iphone is connected to your computer with iphone data cable
1. Download DiskAid which is a free iPhone Explorer [ Lets you explore your iphone files and folder ]
2. Install and Run DiskAid it will automatically detect iphone and navigate to the camera photos folder on your iphone
root >> var >> mobile >> media >> DCIM >> 100APPLE or XXXAPPLE folder.
( as shown in the image below )
( click the image above to enlarge )
3. Right click any image and select Copy to PC and
select a folder to copy these images, that's it . This way you can copy
the images from iphone camera roll folder when you iphone does not show
in my computer.
Hope this helps.
What cant be detected? That error usually means that either a peripheral device (such as a printer, camera or MP3 player) or an internal board (such as a modem, network card, or keyboard or touch pad) is not being recognized by the machine. Generally the error will say what it cant detect, something like "Network not detected" or "Unable to detect video board"
You have not supplied us with vital information to assist you. To give you the specific fix we would need Make & Model of your laptop, what operating system you have loaded (which version of Windows or is it one of the Linux systems) but I will try to help you narrow it down.
First disconnect all wires from the laptop except the power cord. Now turn on the power switch. If you get an error, come back and tell us exactly what it says.
Then start plugging in your peripheral devices (printer, USBs, network, camera, MP3) ONE device at a time. Each time you plug one device give it a minute or two to see it that new device is detected. Lets say that you plug a device and it does not get detected properly, you probably should start by reloading the software drivers for that device.
Start with this and write us back and well give you the next steps.
Ron
36 views
Usually answered in minutes!
×