May be you should try to change all your old ELCO and DDR bus termination regulator (the type is vary depend on the manufacturer) on the GA-EP35-DS3R ...AFTER you buy yourself a new board...or try to check your powersupply current and voltage..check your hdd for bad sector, check your memory for a defective chip (with a multitester, a hirens boot cd or mini pe or bart pe), check your proc and chipset temperature..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi it seems that you know what you are doing - it seems that the problem is with in the connections please recheck the connections
the best way is 1) unplug the HDD (hard disk) Power and Data cable and turn on the PC -- check whether its working (or is it rebooting/restarting) if its restarting then there is something wrong somewhere else
here you said you just replaced the Hard drive -- there are 2 IDE Slots - check connecting the Hard drive to IDE 2 and use the same Data cable for CD/DVD and HDD --
2) check the RAM Connection unplug and replug (it might be loose) but be careful Power supply shout be OFF while playing with Connections
If you need help to fix your computer, we will give it to you, provided that you give us four (4) pieces of information. (1) Manufacturer's or Computer's name; (2) Model name and number; (3) *********** board ID (if you can't find it we can help you do so); (4) the most impotant is number 4 because this is how we get our info. to put into our mathematical prototype. We need in all possible detail what happened just before failure, during the failure and after the failure. Then we have the general position of the failure. When we give you instructions, it is not guesses, but facts. Actually you will have all the glory, because it is you that will fix his own, his proper computer based in our instruction and you following our instruction. My name is Constantin (arzconst is mu nicknmae for Fixya.com)
I need some help. I just bought a new hp netbook, but when I try to turn it on.....all I get is a small box saying: When trying to update a password, this indicates that the value provided as the current password is not correct.
What does this mean, I tried to reboot and everything but nothing happens, the computer keep restarting and I keep getting the same small box. Please need some advice and help
when you click yes it download a newer vires thets takes you back 2 the same page with more virus.. "it's a virus page" hade it my self for a long time ago. what you can try is do restor you computer 2 a later time when u dident have thet virus.. or you will need 2 reformate u computer. I hade to do it.
Your hardware can be a cause of your issue , ( A.K.A bad DVD-Rom , power supply or even the hard drive ) Or the Opertional System is corrupted ( A.K.A Windows XP , WindowsVista , Linspire 6.0 or RedHat Linux )