Question about Samsung Yepp YP-P2 Digital Media Player

2 Answers

Will not turn on,was working fine,will not show connected when plugged in to u.s.b.

Posted by on

  • 8 more comments 
  • tal32123 Jun 12, 2008

    wont turn on wonth charge wont show when connected to usb wont do anything

  • Anonymous Jun 13, 2008

    was listening to song, it just cut out, i tried to plug it in and it wont do anything, computer doesnt even recognize its connected to it! HELP!!!

  • mrriley95 Jun 24, 2008

    it wont turn on and it was working fine but now it wont show that its plugged in to the computer

  • silversummer Jul 11, 2008

    it wont turn on and it was working fine when i plug it in the computer nothing happens

  • jmh5204 Aug 03, 2008

    Was working fine, but when I went to turn it on, it won't turn on. My computer also doesn't recognize it when I plug it into the USB port. Any suggestions?

  • kratos911 Aug 03, 2008

    my problem is that my mp3 player wont turn on not even with new batteries.

  • Anonymous Aug 26, 2008

    won't turn on with new battery was working great then just wouldn't turn on

  • late42 Sep 05, 2008

    it won´t start just says good buy when it should start and it also doesn´t connect to pc.

  • mitch05 Oct 01, 2008

    it was working well last night, but this morning when i have tried to turn it on, it did not turned on. and what i did was i connect it to the computer and thought that it was only need to charge. the computer cannot find it

  • tjdateenhh Oct 02, 2008

    Same with mine. But i tried pressing the reset button, nothing happened.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Unplug it and then push the reset button on the back with a sharp pencil, worked for me

Posted on Sep 20, 2008


Was listening to a song, went to pause. Then would not turn on. It just frooze there...stuck! it stood like that for hours!!!!! is it broken? Never wet or even dropped.

Posted on Jul 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Had 04 transit connect for 6 weeks. always started fine till week ago when turned cold. glow plug light only shows for about 1 second, replaced glow plugs but still the same. can only start every morning...

Sounds like the timer is bad. Since you have power when warm, the power relay must be giving the timer juice. The way it is suppose to work is you wait until the glow plug light goes out and then try to start. In cold weather it should take longer for the glow plug light to go out.

Nov 03, 2013 | Ford Transit Connect Cars & Trucks

1 Answer

Whirlpool Dishwasher appears dead

did you ever find out what was wrong? This just happened to me

Feb 23, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Wireless Router not working

Try turning off your wireless connection, wait a few minutes, then turn it back on to see if you connect to it. Also, if you're using another wireless utility to connect to the router other than the base Windows Wireless Utility, they may be interfering with each other and one may need to be turned off.

I hope this helps.

Oct 17, 2009 | Computers & Internet

1 Answer

Canon hv30 is't being recognized on my vista computer

You may have used a different USB port on the computer. Try a different one.
Generally, any USB port would work, except that some devices create a "Virtual USB" connection that is configured with a specific USB port.

Let us know if this helped...

Sep 16, 2009 | Canon VIXIA HV30 DV Camcorder

1 Answer

Working fine until it got turned off at source. Now showing no power going to it even though it's plugged in

Turned it off for an hour or so then when I turned it on it connected and now no probs.

Aug 04, 2009 | Nintendo Wii Fit for Wii

1 Answer

USB DEvice not recognized

Turn off the CPU unplug the power cable and all usb cables, let it sit for about 15-20 minutes. Plug power cable back in, turn on CPU, plug in your usb devices.

Mar 06, 2009 | Canon PowerShot SD790 IS Digital Camera

1 Answer

Iogear 4 port USB 2.0 HUB (Model GUH285) now working properly

I think it clearly states that the device is defective.... you need to call IOGEAR for RMA if its still under warranty

Jan 25, 2009 | IOGear 4 Port Hi-Speed USB 2.0 Hub

1 Answer

Won't turn on

how old is the system
could be your internal plug for ac may have become lose from plugging and unplugging
or you may just need a new ac cord
try moving it around where it plugs into the laptop if you get a brief connection then it probably is the connection inside the laptop they can be replaced

Jan 16, 2009 | Computers & Internet

1 Answer

Can't find my harddrive

hey, i seem to be having a similar problem. i'm sorry i dont have any answers for you, but if you've found any answers please email me at

Jan 15, 2008 | Computers & Internet

Not finding what you are looking for?
Samsung Yepp YP-P2 Digital Media Player Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electric Dime
Electric Dime

Level 3 Expert

434 Answers

The Knight
The Knight

Level 3 Expert

74858 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides