Question about Computers & Internet

1 Answer

WTService fault After installing a Medion graphics tablet on my Compaq laptop. When I shut my laptop lid I get a message saying WTService is preventing your computer from going into standby. I'm running Xp home edition. Thanks in advance for any help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Right click on task bar, click on properties, start menu, 'customized', 'advanced', scroll down to end of list and you'll see " System Administrative Tools". Select 2nd option "display on the all programs and start menu" and apply or OK all the way out.
Now, from START menu, click on "Administrative Tools" - then "Services" - scroll down to bottom where you'll find "WT SERVICE". Right click and click on "properties". Change 'startup type' from 'automatic' to 'manual' and you can now select 'stop' button. Click ok and your laptop will now stand by. If youor Medion doesn't work you can now turn on the WT service manually.
Regards
Uncle Bob

Posted on Jul 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My compaq presario cq60 wont turn on


Does the laptop boot? Sound? Do you see a "ghost Image" in the monitor in a bright light? If so, Could be backlighting, Inverter, on/off switch that shuts the monitor on/off when you open and close the lid. Can you boot to safe mode with networking? If so, Open the Device Manager, Uninstall the Graphics Adapter, reboot, the software will apply a generic driver, If the Graphics adapter has not failed completely.

Jan 24, 2013 | Compaq Presario CQ60-220US PC Laptop

1 Answer

HOW TO INSTALL A TEVION MD41217 GRAPHICS TABLET WITHOUT A DISC


TEVION MD41217 GRAPHICShttp://www.downloadsource.net/474/Medion-MD41217-USB-Graphic-Tablet-Driver/

Jul 21, 2012 | Audio Players & Recorders

1 Answer

Please wait message


The easiest solution is to unplug the AC adapter and pull the battery. This will shut off the laptop.
Once it is off let it sit about 10-20 seconds then put the battery back in and plug in the AC adapter.
You should now be able to press the power on button and it should boot up. It may give you a screen saying the last time it shutdown it was not good. Just pick to boot with last known good configuration and you will be fine.

Jun 14, 2009 | Compaq Computers & Internet

2 Answers

Hi i have got a medion mim2230 laptop. when i turn it on i get a page that comes up and says 'sorry for the inconvienience, but windows did not start successfully. a recent hardware or software change...


hi
i have had the same fault with my medion mim2230 and tryed everything you list and i now have put it down to a battery pack fault why i say that is i removed my battery and laptop works ok some i ordered a battery of
ebay and placed it in my laptop and now its ok but just to make sure
i put my old battery pack back in my medion mim2230 and it come up with the same fault again so turned laptop off and replaced my laptop battery with my new one from ebay and its working ok

May 14, 2009 | Medion md40298 Notebook

1 Answer

Asus F3S Laptop Graphics Card Died


If you have run the laptop in safe mode it uses the standard VGA graphics driver, and this indicates the onboard graphics card is still functioning.
Try connecting and external monitor to your laptop and the boot up your laptop.
Then :-
1. Download the latest graphics driver from ASUS WEB site.
2. uninstall the graphics driver.
3. Reboot the laptop and install the new graphics driver.
4. Shut down and remove the external monitor and reboot.
5. Goto the Control panel - Display and check/set the settings for screen resolution, Colour setting etc.

Nov 13, 2008 | ASUS R1E-B1 Tablet PC

1 Answer

Graphire4 Vista


Vista doesn't support many things.. you need to see if you can find a driver for it or revert back to XP, or get a new graphics tablet

Jun 12, 2008 | Wacom Graphire3 Tablet 6x8 (C267252627)

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...