Question about Tecumseh Enduro Vertical Engine 16 HP 1in x 3 532in Shaft Model OHV16204230F

1 Answer

I need to know how to wire a new ignition switch for a Murray ride on lawnmower that has a Tecumseh Enduro 15.5 engine. Thanks, northbendnick There are 5 wires from the engine: white, yellow, red, black and a black/red combo. I cannot get the model number since the label is worn away. We have purchased a 5 position ignition switch whose terminals are labeled: B, S, G, M and L. Will this switch work for this engine? IF so what wires connect to which terminals? If not, what kind of switch to we need and then what wires will connect with which terminals? We have been frustrated in trying to get this baby to run so any information you can provide will be very much appreciated. Thanks, Northbendnick

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

Http://www.ereplacementparts.com/ then type in your model number found on back or under seat ei 40560x50c and you will get parts and diags drawing. Good luck Henry

Posted on Jan 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Murray 20 model 20213A with a Tecumseh engine. The lawnmower will start but it dies a few minutes later. What could cause this and where can I get a manual for this model lawnmower?


Use high test fuel without ethanol, and

Murray 22" Lawn Mower - Carburetor Cleaning, Nasty ...

? 7:33
www.youtube.com/watch?v=_dzcDZUh1MY
May 10, 2013 - Uploaded by mountainbikekayak But here is the link for the start up of this Murray had to replace the plug as well also ... as well: Murray 22" Lawn Mower 6.5 HP OHV -- First Start after Carburetor Cleaning - Part III - May 9, 2013 ... When I start it, it runs for 3-4 seconds and dies. ... Youcan also find you engine Model # online and view the ...

Sep 09, 2015 | Tecumseh Garden

1 Answer

How to test a seat safety switch on a Murray 12.5hp riding lawnmower


If it is the one thinking of which would be a two wire version when no one is the switch there should be closed indication and depressed should an open condition.

Jul 11, 2015 | Murray Garden

1 Answer

Looking for a manual & parts list for a 13hp Tecumseh Enduro 38506x engine that is on a Murray riding lawnmower.


Try e-bay under your brand of mower or engine, or go to craigslist in your area under BOOKS, if not go to your local Murray dealer who should be able to help you. GOOD LUCK FRIEND.

Nov 28, 2014 | Murray Garden

1 Answer

My Murray lawn


mix sea foam with gas per instruntions let run for a while be sure plugis new and gap is right

Jun 28, 2014 | Tecumseh Enduro VTwin Vertical Engine with...

2 Answers

Carburators are not getting fuel


have a murray 20 hp tecumseh has gas in the bowl but wont start unless u spray the carb then it dies when u stop spraying any ideas

Apr 14, 2011 | Tecumseh Enduro VTwin Vertical Engine with...

1 Answer

I have a 13.5hp ohv tecumseh engine. murray ride on mower.I need a new starer motor. thank you.


Go to www.jackssmallengines.com and try searching for one. It helps a lot if you have the Model Number of the engine. eBay might be a good source, as well.

Oct 19, 2010 | Tecumseh 100% 12v Starter 35765 32468...

1 Answer

I have a 1983 Murray riding mower, I need to know the ignition wiring diagram. There's a yellow ignition switch and I don't know where it goes to. There's also a single wire that comes out from the front...


Hi,
With the model number, you can obtain a users manual. I viewed their sample and it included the wiring diagram... SWEET!
Here is the link for your manual:

http://www.outdoordistributors.com/Murray/Murraypartslists.html

Hope this helps... Good luck!

Sep 22, 2009 | Garden

3 Answers

Mtd riding lawnmower won't run


my mtd lawn mower wont start . when I turn the key there is a buzzing soung where the battery conectors are near the shifter but the starter is hot and getting juice

Sep 28, 2008 | Garden

Not finding what you are looking for?
Tecumseh Enduro Vertical Engine  16 HP 1in x 3 532in Shaft Model OHV16204230F Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tecumseh Garden Experts

Mike Squire

Level 2 Expert

420 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

lnbn1975

Level 2 Expert

203 Answers

Are you a Tecumseh Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...