Question about Intermatic Inc. ST01C Digital In-Wall Timer

1 Answer

Dusk to dawn light flickers on and off sometimes says on for hour or two then 5 minutes off and on installed new bulb and checked wire connections still flickers charlie

Posted by on

Ad

1 Answer

I answer questions for free here at fixya.
I know timers and electrical devices.
If the following information does not help, add a comment and I will work on the problem further.

You posted under the Intermatic ST01C timer.
I assume this is not a new installation, so we know the wiring is correct, and your programming worked correctly in the past.
You have the timer set up for dusk to dawn.

The manual has troubleshoot section.
http://waterheatertimer.org/Intermatic-st01c.pdf

I have read the manual and tested&wired the timer and programmed the timer.

A low battery can cause this kind of problem, even if BATT is not flashing on screen.
The manual also says when encountering a problem, you can reset and then reprogram the timer.
The manuals says to check for loose wires, and defective bulb.
The timer does not work on circuits longer than 100'
The timer does not work if there are underground wires.

The symptoms you describe sound like loose wires or a light bulb.
I would check the wire nuts at the timer and at the outdoor fixture.
Change the outdoor bulbs.
As last resort, reprogram the timer.
These electronic devices go bad, and the ST01C has a 1 year warranty >>> combine the short warranty with the long troubleshooting section, I believe the product fails frequently.

Posted on Nov 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a dusk till dawn timer master plug did one that I wanted a TDD-MP but cannot get them anywhere so now looking for a Paget dtd timer where can k get one


  • No Paget, but lots of others
  • DUSK TILL DAWN LAMP TIMER - Nexus Industries www.nexusinds.com/masterplug/downloads/pdf/TDD.pdf · PDF file DUSK TILL DAWN LAMP TIMER SWITCHING MODES i) Timer mode ii) Random mode iii) On mode iv) Off mode v) Dusk 'Til' Dawn mode i). Timer Mode The timer will turn ...
  • Dusk to Dawn Timer ' eBay > www.ebay.com/bhp/dusk-to-dawn-timer Find great deals on eBay for Dusk to Dawn Timer in Light Timers. Shop with confidence.
  • images of dusk till dawn timer bing.com/images b3eo0&w=105&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2">551o0&w=60&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2">6f9o1&w=72&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2">595o0&w=99&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2">773o0&w=107&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2">fcfH0&w=72&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2"> See more images of dusk till dawn timer
  • Dusk to Dawn Photocell Sensor Timer Switches 10.02 www.acetek.co.uk/id66.html Acetek manufacture Dusk to till dawn photocell timer light sensitive sensor switches for energy saving lamps LED 6v 12v 24v and 240vAC
  • Dusk Till Dawn' Self-Dimming Lighting. - D-D The ... www.theaquariumsolution.com/files/Dusk Till Dawn Instructions... · PDF file 3 Step 4 - Synchronising Programme with the Plug Timer It is necessary to synchronise the Dusk till Dawn chip to the time of day during which the unit has been ...
  • Amazon.com: dusk to dawn timer www.amazon.com > Search > dusk to dawn timer Amazon.com: dusk to dawn timer. Amazon Try Prime All Go. Shop by Department. Hello. Sign in Your Account Sign in ... after 2,5 or 8 hours / Dusk to Dawn default timer
  • Items found similar to "DUSK TILL DAWN PHOTOCELL ... - eBay www.ebay.ca/sch/sis.html?_nkw=DUSK+TILL+DAWN+PHOTOCELL+SENSOR... Photocell Timer light Switch Daylight Dusk till Dawn Sensor Light switch G8. ... 5 Pcs Dusk To Dawn Photocell Light Control Auto Sensor Light socket Black.
  • Amazon.co.uk: dusk to dawn timer www.amazon.co.uk > Search > dusk to dawn timer Amazon.co.uk: dusk to dawn timer. Amazon.co.uk Try Prime All ... Battery Operated Fibre Optic Snowman, Built in dusk till dawn light sensor. Kitchen & Home: ...
  • Feb 05, 2016 | Hardware & Accessories

    1 Answer

    Can I install a utilitech Dusk-to-Dawn light control, #0314355 in a 'horizontal' position, rather than the 'vertical position shown on the packaging? It goes 'on-and off' in a 15 s


    Timer is probably wired incorrectly.
    Copy following links for correct wiring, and larger instructions.
    I have tested this timer, and some problems can also be caused by overlapping and conflicting programs: reset timer and review timer instructions:
    http://waterheatertimer.org/How-to-set-timers.html
    http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

    If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

    Jul 31, 2012 | Hardware & Accessories

    2 Answers

    Westek SLC6CFL programming instructions


    Copy following link for Westek outdoor socket timer instructions:
    http://waterheatertimer.org/pdf/Westek-SLC6CFL-timer-instructions.pdf

    If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

    Jun 27, 2012 | Ace Hardware AMERICAN TACK 3236858...

    1 Answer

    I bought two motion sensing diecast lanterns model HB-4190 series, SKU 248-593 and the instructions are hard to understand. To make it easy tell me how to set the device if I want it to come on only if...


    Hello Gerald. Each switch has a function. the the test-1-5-10 allows you to set it to test or an on period of 1 or 5 or 10 minutes. The off-3-6-dusk to dawn allows you to turn it off completely, operate from dusk for 3 hours, operate from dusk for 6 hours or operate from dusk to dawn. By operate I mean turn on and then stay on for the number of minutes you set it to with the other switch.

    what's nice about the test setting is that with it allows you to check and b sure that the light will come on during daylight by setting the one switch to test and the otner to any setting but off.

    If you leave the 2nd switch set to off the first switch will not allow you to test it.

    Joe

    May 22, 2011 | Garden

    1 Answer

    Need instructions to set this timer


    You posted under a photo that looks like Woods/Coleman cable 2001/49647 timer
    See image at Amazon
    http://www.amazon.com/dp/B00002NB2X/ref=asc

    If this is not your timer, see all Woods timers and manuals at following link:
    Add a comment any time
    http://waterheatertimer.org/Woods-timers-and-manuals.html

    Manual for Woods 2001-49647
    http://waterheatertimer.org/pdf/Woods-2001-49647.pdf

    Instructions:
    Plug in timer, plug lights into timer, capacity 1875 watts
    50-mini-bulb string of Christmas lights is 25 watts
    Timer tuns ON automatically at dusk
    Use dial to set 4 possible options:
    Off = always OFF
    ON - always ON
    Dusk-Dawn = ON at dusk, OFF at dawn
    2,4,6,8 hours = ON at dusk, lights OFF 2,4,6,8 hours later

    Dec 09, 2010 | Woods Outdoor Lighting Timer

    1 Answer

    Lost instructions for photocell Type:ET321


    Here is how it works. The push button repeats itself in following sequence (must plug in).
    F 1 2 3 4 5 6 7 8 9 A d 1. 2. 3. 4. 5. 6. 7. 8. 9.

    F: timer is off.
    1 2 3 4 5 6 7 8 9: from dusk to dawn count down number of hours repeated every day. That's most useful to control outdoor lightings.
    A: from dusk to dawn count down number of hours which is randomly selected by this timer. Which is usually for indoor use to turn lights on and off for number of hours. The randomly selected hours is a security feature so that lights on (on from dust, but off randomly) time shows no pattern to outsiders.
    d: just on from dusk and off at dawn. It is also used to control outside lights but just a little wasteful in my opinion.
    1. 2. 3. 4. 5. 6. 7. 8. 9.: meaning count down number of hours starts from the time when the button is pushed so that you can have a countdown timer at any time.

    Dec 08, 2010 | Impact First Alert Outdoor Digital...

    1 Answer

    I am looking for a download link for the First Alert ET321 with photocell. I have misplaced the original package instructions and cannot find this material anywhere! Your assistance would be greatly...


    Here is how it works. The push button repeats itself in following sequence (must plug in). F 1 2 3 4 5 6 7 8 9 A d 1. 2. 3. 4. 5. 6. 7. 8. 9.
    F: timer is off. 1 2 3 4 5 6 7 8 9: from dusk to dawn count down number of hours repeated every day. That's most useful to control outdoor lightings. A: from dusk to dawn count down number of hours which is randomly selected by this timer. Which is usually for indoor use to turn lights on and off for number of hours. The randomly selected hours is a security feature so that lights on (I believe the on time is within the range of 1 hour from dusk set by the timer) and off (it is randomly set, you can see the display blinking showing the selected countdown hours) shows no pattern to outsiders. d: just on from dusk and off at dawn. It is also used to control outside lights but just a little wasteful in my opinion. 1. 2. 3. 4. 5. 6. 7. 8. 9.: meaning count down number of hours starts from the time when the button is pushed so that you can have a countdown timer at any time.

    Oct 11, 2010 | Impact First Alert Outdoor Digital...

    1 Answer

    I have a gang of 5 lights wired together and are always on. How do I install a dusk to dawn control on the group Thanks


    If the lights are all on the same circuit, then the dusk/dawn contronl would be wired into the circuit just like a switch. something like this ..

    .


    7a756f9.png Please Vote !!

    May 13, 2010 | Garden

    1 Answer

    Instruction for first alert et321 timer


    Here is how it works. The push button repeats itself in following sequence (must plug in).
    F 1 2 3 4 5 6 7 8 9 A d 1. 2. 3. 4. 5. 6. 7. 8. 9.

    F: timer is off.
    1 2 3 4 5 6 7 8 9: from dusk to dawn count down number of hours repeated every day. That's most useful to control outdoor lightings.
    A: from dusk to dawn count down number of hours which is randomly selected by this timer. Which is usually for indoor use to turn lights on and off for number of hours. The randomly selected hours is a security feature so that lights on (on from dust, but off randomly) time shows no pattern to outsiders.
    d: just on from dusk and off at dawn. It is also used to control outside lights but just a little wasteful in my opinion.
    1. 2. 3. 4. 5. 6. 7. 8. 9.: meaning count down number of hours starts from the time when the button is pushed so that you can have a countdown timer at any time.

    Dec 13, 2009 | First Alert Hardware & Accessories

    2 Answers

    Light timer not in sync


    Try Googling (brand)(5316A)(manual) without parens.

    May 16, 2017 | Hardware & Accessories

    Not finding what you are looking for?
    Intermatic Inc. ST01C Digital In-Wall Timer Logo

    1,362 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Intermatic Hardware & Accessories Experts

    Craig Butler
    Craig Butler

    Level 3 Expert

    1723 Answers

    Gene Haynes

    Level 3 Expert

    5245 Answers

    Jay Finke
    Jay Finke

    Level 3 Expert

    1384 Answers

    Are you an Intermatic Hardware and Accessory Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...