Question about Frigidaire GLTF2940WH

1 Answer

Efo code i am not sure of my model of my frigidaire front load washer but it has a code efo that flashes on it after it has washed can you tell me what this means

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Affinity washer flashing EFO


Good Morning Friend,

I understand that your Frigidaire Affinity washer, model# ATF7000E, is flashing an EFO code. I do not show an EFO code for your appliance.

I do show an EF1 code, which means the drain pump is clogged. In this instance you would unclog the drain pump.

I also show an EF2 code, which means too much soap was used. All you would do for this would be to try using less soap.

It could also be a false error code. I suggest resetting your washer, by either unplugging it or shutting the power off at your homes circuit breaker, for 3-5 minutes. When you restore power, start any cycle on your washer. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your washer status has changed successfully. Hope this is helpful.

-Best Regards-
WP

May 15, 2014 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

EFO code cameup.


Its not EFO its EF0 .Theremust be some thing blocking the pump .For example socks,underwear etc. The water was not cycling through properly. Cleaned it out and everything works fine.Use proper detergent mentioned for your model because even SUD formation can cause this error.

Jun 18, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

While washing the letters EFO flash. what does this mean?


Hi,


If your washer displays EFO it means that you are not using HE detergent. You must have used too much detergent on a particular load.You have to use He detergents to fix this issue or else not using it will ruin your washer because regular soap makes too much suds.


Thank you!

May 28, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Flashes efo on display halfway through cycle


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 20, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Affinity ATF7000E Front Load Washer: where do i find what efo means on my affinity wash...


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 16, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Flashing EFO error code


spoke with electrolux and they tell me that it is over sudsing problem. The washer must use HE detergent or use only a the lowest amount on the cup.

Jul 19, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Front loading washer


I don't see either of those error codes in the frigidaire technical data for this model. You can look here:

http://www.frigidaire.com/support/ResultsPage.asp?strModel=atf6000es&User=&Search=Search

I've heard EFO has to do with oversudsing so if you're using HE soap use less, if you're not you should switch.

Nov 03, 2007 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Flashing EFO error code


I've read in a product review that Frigidaire put out a service bulletin regarding the electronic timer circuit board in these machines. Apparently enough of these boards failed to prompt a factory response. With this in mind, you should call an appliance repair center and ask them if they're aware of this Factory Service Bulletin. In many cases like this, where a part is manufactured defective, the repair could be free to you.

Aug 03, 2007 | Frigidaire GLTF1240A Front Load Washer

3 Answers

Error messages EFO and E10


It is simple. The wrong soap or too much soap will caused EFO to flash. I overfilled the machine with soap by accident. It started flashing with EFO and I went nuts. What could be wrong with it now?! Too much soap or not the right kind of soap will cause this problem.
Plus, I found a sheet of paper that gives the codes.

This is better than when the strainer plug gets filled up and you have to take the machine apart to clean the little strainer.

Apr 16, 2007 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Frigidaire GLTF2940WH Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...