Question about One Touch Jitterbug One-Touch Cellular Phone

1 Answer

How do I input names on address screen in all CAPS

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

When you are at the "Enter Name" screen while adding a contact to your Phone Book, press the "*" key to switch between modes. You can check which mode you are in by looking at the box in the upper-righthand corner.

"Abc-W" mode will capitalize the first letter of each word
"Abc-S" mode will capitalize the first letter of each sentence
"ABC" mode will enter in all capital letters
"abc" mode will enter in all lower case letters
"123" mode will enter only numbers

You may switch between modes while entering the name if , for instance, you need to switch between letters and numbers,

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

40 inch flat screen, got power light but no picture. My caps look good


Make sure you have your devices plugged into the different appropriate inputs, then cycle through them, either by hitting the button for the device or repeatedly pressing an input button to cycle through the available inputs. Make sure your service is on and connected. "caps"????? to what are you referring?

Feb 23, 2016 | Televison & Video

1 Answer

My sharp 32k-s400 keeps off setting and going to EZ setup screen and i can see the numbers showing on the screen the the screen remains very dark as though its off


It sounds that the memory IC to your TV has damaged. If you have sound knoledge in electronics, get into its service menu. You can get more details about how to enter into service menu from here.

Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.
Service mode options, and proceedings are given in detail. Some times the adverts' beside each posts might help you more.

May 25, 2012 | Sharp Televison & Video

1 Answer

I'm online trying to register for a P/P Prem Account and I've filled in the first page of personal info...Name, Address, email & password etc. activate it at the bottom of the screen ... &...


I checked it right now, and you don't need to put a middle name.. These are the only things you need to input:

  • Email Address: Please enter a valid address in the format name@domain.com.
  • Password: Your password must contain between 8 and 20 characters. Please enter a longer password.
  • First Name: Please enter only letters, hyphens, spaces and commas.
  • Last Name: Please enter only letters, hyphens, spaces, and commas.
  • Address line 1: Please enter a valid Address line 1.
  • City: Please enter a valid City.
  • Home Telephone: Please enter a valid telephone number.
  • Date of Birth : Please enter your date of birth.
Hope this helped! =)

May 19, 2011 | PayPal Accounts

2 Answers

How do i get my password from my linksys


  1. Open a web browser (such as Internet Explorer or Netscape)
  2. When the browser opens, go to the "Address" bar and input the IP address of the Wireless Router (The default IP Address is 192.168.1.1).
  3. A "User Name" and "Password" prompt will appear, leave the "User Name" field blank and input the Wireless Routers password (The default password of a Linksys Router is admin) into the "Password" field.

Jul 10, 2010 | Linksys WRT160N Wireless Router

1 Answer

HELLO; HOW TO PUT WAYPOINTS [addresses] IN TO MY GARMIN 255W??? WHITH NAMES. AND THAN TO SHOW THEM ON THE SCREEN? THANKS JERRY


Hi Jerry,
You have somehow posted a GPS question in a Sewing Machine area, suggest a repost....and try not to use all caps please, it is online shouting and difficult to read.

Aug 02, 2009 | Sewing Machines

1 Answer

I need to do port forwarding


You need to access the router setup screen if you want to do port forwarding on the router. also you need to check the IP address of the unit, or device you want to forward as well as the port service.

in accessing the router setup screen;

> open IE, on the address bar type 192.168.1.1 - username is blank and password is admin in lowercase.

> go to applications and gaming

> look for port range forwarding, input the name- any name will do

> the service port for example it is only one port service to open and that is port 80 and then you should have to put there 80 to 80 then check if tcp/udp protocol as well, check the IP address of the computer and then enable.

> to check the IP address of the computer go to start> run > cmd and hit okay > then type ipconfig check the IP address after.

hope

Jul 11, 2009 | Computers & Internet

1 Answer

Set up email/scan


moz-screenshot.pnghere's how to add contact to the address book:
  1. press FUNCTION key
  2. select FAX/EMAIL SETTINGS icon
  3. select ADDRESS BOOK
  4. select ADD EMAIL ADDRESS
  5. input your email address
  6. input your name
  7. select ok
  8. input a key name
  9. you can choose if you want to add it to favorites or not
  10. press stop key to return to idle state
that's it :)

Jun 12, 2009 | Panasonic DP-8045 Grayscale Copier

1 Answer

D-Link AirPlus Xtreme G DI-624


Using the Configuration Menu
Note: if you have changed the default IP Address assigned to the DI-624, make sure to enter the correct IP Address.



 Open the web browser
 Type in the IP Address of
the Router (http://192.168.0.1)

12 Type admin in the User Name field
Leave the Password blank
Click OK
Home > Wizard
The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard.
.
These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change.
.
.
.13
Using the Configuration Menu (continued)
Home > Wireless
Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
SSID-
Channel-
6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.)
WEP-
Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-624 make sure to also enable encryption on all the wireless clients or wireless connection will not be established.)
WEP Encryption-
Select the level of encryption desired: 64-bit, or 128-bit.
Key Type-
Select HEX or ASCII.
Keys 1-4-
Input up to 4 WEP keys; select the one you wish to use.14
Using the Configuration Menu (continued)
Home > WAN > Dynamic IP Address
DI-754
Dynamic
IP Address-
Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.
Host Name-
The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.
MAC Address-
The default MAC Address is set to the WAN’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.
Clone
MAC Address-
The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.
Enter a DNS Address if you do not wish to use the one provided by your ISP.
Primary/
Secondary DNS Address-
MTU-
Enter an MTU value only if required by your ISP. Otherwise, leave it at the default setting.15
Home > WAN > Static IP Address
Static IP Address-
Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address-
Input the public IP Address provided by your ISP.
Subnet Mask-
Input your Subnet mask. (All devices in the network must have the same subnet mask.)
ISP
Gateway Address-
Input the public IP address of the ISP to which you are connecting.
Primary
DNS Address-
Input the primary DNS (Domain Name Server) IP address provided by your ISP.
Secondary
DNS Address-
This is optional.
Enter an MTU value only if required by your ISP. Otherwise, leave it at the default setting.

Aug 27, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

3 Answers

Unable to log in with original screen name after creating 2nd. screen name*


Can you please let me know what email you are using such as outlook express, yahoo, etc. thanks

May 02, 2008 | Microsoft Office Outlook 2003 for PC

1 Answer

Wavy picture on all video inputs except component video toshiba 57h82


make sure you replace all the 10uf caps and that the connections are good....

Sep 20, 2007 | Toshiba 57H82 57" Rear Projection...

Not finding what you are looking for?
One Touch Jitterbug One-Touch Cellular Phone Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top One Touch Cell Phones Experts

john smith

Level 2 Expert

402 Answers

Marvin
Marvin

Level 3 Expert

83810 Answers

Lawrence Oravetz

Level 3 Expert

10478 Answers

Are you an One Touch Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...