Question about Panasonic KX-T7453 Corded Phone

1 Answer

How do I get the 2nd display screen to show Call Logs

I can not get the 2nd display scren to show the call log for old and new calls.

Posted by on

  • laconnell Jun 26, 2008

    I know that is how it is suppose to work, but pressing shift just toggles between Feat /BGM screens

  • laconnell Jun 26, 2008

    Thanks, That makes sense and yes that is what is happening!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Press [Shift] until it does.

Posted on Jun 25, 2008

  • Eric Akau Jun 26, 2008

    The call log is a 3rd screen only if there is CID info at that ext. If you have moved to a new ext or someone has deleted the call log you will only see the 2 different screens.



    The CID info should display on the screen of the ringing phones. The shift button will also turn red. Left un-answered, that information will land in the call log of the lowest number ringing set (usually 101).

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i make my phone number visible to my callers when calling from a Vtech phone


Caller ID
If you subscribe to caller ID service, information about each caller appears after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log. The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the telephone number has more that 15 digits, only the last 15 digits appear. If the name has more than 15 characters, only the first 15 characters are shown and saved in the caller ID log. Review a caller ID log entry Press CID when the phone is not in use. Scroll to browse through the caller ID log. When the desired entry appears: Press repeatedly to show different dialing options. Press 1 repeatedly if you need to add or remove 1 in front of the phone number. Press or to dial the displayed number. Dial a caller ID log entry When the desired entry appears, press or to dial. 1. 2. 1. 2. 3. 4. 1. 2. 3. • 1. 2. • • 3. • Save a caller ID log entry to the phonebook When the desired caller ID log entry displays, press SELECT. 2. Scroll to To Phonebook then press SELECT. 3. Use the dialing keys to modify the number, and then press SELECT. 4. Use the dialing keys to modify the name, and then press SELECT to save. Delete a caller ID log entry When the desired caller ID log entry displays, press DELETE. Delete all caller ID log entries Press MENU when the phone is not in use. Scroll to Caller ID log and then press SELECT. Scroll to Delete all and then press SELECT twice.
Call block
If you subscribe to caller ID service, you can set the telephone to block unknown calls and certain undesired calls. The call block list stores up to 20 entries. Block unknown calls Press MENU when the phone is not in use. Scroll to Call block, and then press SELECT. Scroll to Calls w/o num, and then press SELECT. Scroll to choose Not block or Block, and then press SELECT. Add a call block list entry 1. Press MENU when the phone is not in use. 2. Scroll to Call block, and then press SELECT. 3. Scroll to Block list, and then press SELECT. 4. Scroll to Add new entry, and then press SELECT. 5. Enter the number. • Use the dialing keys to enter the number (up to 30 digits). 6. Press SELECT to move to the name. 7. Use the dialing keys to enter the name (up to 15 characters). Additional key presses show other characters of that particular key. 8. Press SELECT to save. 1. • • 1. 2. 3. 4. Review call block list Press MENU when the phone is not in use. Scroll to Call block, and then press SELECT. Scroll to Block list, and then press SELECT. Press SELECT to choose Review. Edit a call block list entry When the desired entry displays, press SELECT. Use the dialing keys to edit the number, and then press SELECT. Use the dialing keys to edit the name, and then press SELECT to save. Save a caller ID log entry to call block list 1. When the desired caller ID log entry displays, press SELECT. 2. Scroll to To Call block then press SELECT. 3. Use the dialing keys to modify the number, and then press SELECT. 4. Use the dialing keys to modify the name, and then press SELECT to save. Delete a call block list entry When the desired call block list entry displays, press DELETE.

Mar 15, 2016 | Vtech V CS6419-2 DECT 6.0 Cordless Phone,...

1 Answer

How do I find the call log on this phone?


I don't understand. What phone do you use? If it's an iPhone, then it won't be difficult to export call logs from the handset. What you need is a program named iOS Data Recovery on your computer/Mac. The tool allows users to extract data from iTunes and iCloud backups. Give it a try.
http://www.leawo.org/tutorial/how-to-export-call-logs-from-iphone.html

Dec 15, 2015 | Phones

1 Answer

How can I set to see caller ID on my phone extension


Nothing special on the phone. Special on the system. Better to have a manual and set the options in the programming. You can program a couple of buttons to display call logs (on a TA-824) and Name/Number display.

Jul 17, 2012 | Panasonic KX-T7730 Corded Phone

1 Answer

Can I get a call log from yesterday's phone call


It's only marginally possible, but you can start logging calls from today forward.

In a TA-824 and higher system, you can start an incoming call log. It's explained in the Installation and features manual. It's a couple of buttons you assign CID Select and CID Indication. That logs INCOMING calls with Caller-ID.

On the side or bottom of the Panasonic Key Service Unit, there is a DB-9 or DB-25 serial connector. If you turn on SMDR and connect it to a PC or serial printer (whatever that is) you can capture all the traffic in the box. There is software, or plain old Hyperterm will store the data. Now, the marginal part is that the SMDR data is buffered. If it's turned on but there's no capture device, the data will still be there. The trick is to get a com port opened up and the right speed (9600,N,8,1) and when you plug it into the port, it will spill the data (past history) to the buffer size.
It might pick up the last 200 calls.


Carl

Aug 26, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

How can I view and print call log from PANASONIC KX-TEM824?


Viewing is easy, printing not so much. The system has a DB-9 serial port on the cabinet. That serial port can be used to capture SMDR (Station Message Detail Recording) to a software program that can sort and print the call logs. Outside of that, you can turn on call logging (an option 6 or 7 or 96 and 97 IIRC from the PROGRAM press a button and dial the code) that will visually display personal or system calls.

It would be in your Operating manual. We use a program from the U.K. that captures the serial port and makes it available on the network, called Serial Logger Service It's a 30-day free trial, then $75 to register it..

Carl

Aug 19, 2011 | Panasonic KX-T7636BK Digital Telephone...

2 Answers

How do you delete missed call message from vtech 6.0 phone


Open the caller ID screen and scroll through the recent calls. Hope this helps =]

Mar 01, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

How to do check my missed call log


A Panasonic TDx system has 2 types of call logs, one personal for the set, and one for the ICD group.

Pick a spare button, press PROG, the button, and dial 54 STORE.

If you had incoming: 00x on your display, that button will light and you can now press it to see who called. Your Navigator UP/DONW key will step you forward or backward through the log. The LEFT/RIGHT key will display the 4 lines of the display if you're not using a 7636 phone.

If you want to see incoming calls to a particular ICD group, pick another button, and dial 54 plus the ICD group number. For example, I used 100 as my ICD group (now 600 by default). I have 2 buttons, one logs my extension calls, one displays the system calls.

Carl

Mar 09, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

Display showing "Incoming Call :001"


Don't worry, if you ignore it will grow :-)

It's a count of the unanswered calls with CID. If you take a spare button and program it for Call Log, it will light up and you press it to start the call log display.

Try this press PROG 54 STORE

When you press it, your display will now reveal the numbers under incoming.

If you put a number after the 54, it will log calls for a particular group. I get my calls on incoming group 100, so I store 54 100 under a button and I can see all system calls. I have a second button for just my extension calls.

Carl

Jan 15, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

How do I delete all old messages?


Use the left arrow on the direction circle then when the display shows incoming call log press the enter key. If you want to remove all entries just keep pressing the CLEAR button just below the display screen untill it goes back and show RING inplace of CLEAR.

This if you do not have the buttons below the display screen you need to get a 24 button Panasonic KX-T7630AL Corded Phone and you will have the functionality to do it, the 12 button version can not delete the logs.

Dec 31, 2008 | Panasonic KX-T7630 Corded Phone

1 Answer

Screen always says: "Incoming Call :001"


Power cycling is not supposed to clear the incoming call log.

I will give you the book description of how to use the Navigator key on a 76xx phone. It may or may not work.

You can program a call log button, or use the Navigator to display, call, or erase the incoming call log. To display, press the call log button or left arrow on the navigator button twice.
It will show the last call. While that display is viewable, press the TRANSFER button to delete it, or lift the handset or press SP-PHONE to call it..

Your up and down arrow keys will step between the calls if you have more than one.

To program a button for call log, press the PROG softkey, a button, dial 54, and STORE.

These are the instructions for your personal call log. There are also instructions for Incoming Call Group (ICD) call logs.

These and other instructions are outlined in the TDA Operating manual.
Your dealer/installer should be able to get you a copy if you don't have one.

Carl

Sep 18, 2008 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7453 Corded Phone Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...