Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

1 Answer

Hotpoint dishwasher stuck on DEMO program

Hiya

I have just run a pre-wash on my dishwasher and for some reason it is now stuck on the 'demo program' - I have turned at the mains - but still on demo - how do I clear it?

Thanks

Emma :-)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

I f you have warranty on this please call them, you have a defective D/W.Unless there is no charge for repairs ,don't spend a dollar on what is going to be a on going problem ahead.To explain how to fix this is what the manufacturer should have done in the factory and not made 1 dollar off of this defective D/W until it proved this to be ready .What has happened to Quality Control ? Does it no longer matter ? Very sorry ,you should seek a refund ASAP.

Posted on Jun 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My electrulux dishwasher is stuck on control demo


Try these steps to resolve your demo mode concerns:

Demo menu is invoked by holding the Select Option and Right Arrow keys for 5 seconds.
Arrow to the DEMO ON option in the demo menu.
Press SET to turn off the demo feature. DEMO OFF will be displayed.
At this time, all outputs are operational.
To return to normal operation, press and hold Select Option and Right Arrow keys for 5 seconds.

Let me know if you have any problems or something does not appear to be correct while doing the above. Thanks!

Mar 30, 2013 | Electrolux 24 in. EDW5505EPS Stainless...

1 Answer

Seems to be stuc in Demo mode and refuses to do anything except select programs


the way I clear a cycle on my FDW50 is to open door,push and hold cycle selector and cycle start until you hear prolonged beep followed by three short beeps-this will cancel whatever has been selected

Nov 10, 2011 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

HOtpoint Fdw 60 goes straight to DEMO mode and refuses to do anything? Any idea?


Try resetting cycle-Push cycle select and cycle start together till you hear a long beep followed by three short beeps.this will cancel previous selection and allow a new program to be selected

Nov 10, 2011 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Dish wash stuck on DEMO , can not programme - no information in manual


Try killing power to your dishwasher and then turning back on.

Aug 19, 2010 | Hotpoint Dishwashers

1 Answer

Hotpoint ultima dishwasher fdw 80 will not program comes up DEMO tried switching off at mains to try to reprogram all to no avail any ideas gratefully received


i connected to hotpoint dishwasher manuals and it came up with my model and how to rectify the problem which following the instructions i solved the problem .

regards

ray

Aug 07, 2009 | Hotpoint Dishwashers

5 Answers

Ariston LD 87 Demo displaying and wont run


I pushed the "power button" and the "start button" together for some seconds, and then the dishwasher was ok, and didnt run the Demo longer.

Jan 24, 2009 | Kenmore 17024 Built-in Dishwasher

3 Answers

Fdw80 stuck on demo


Hold start and on /off button togerther then will reset.

Dec 08, 2008 | Hotpoint 24 in. FDW60 Free-standing...

2 Answers

Hotpoint Ultima dishwasher dwf70


Press and hold the start and the on/off buttons together. It should come out of demo mode.

Aug 25, 2007 | Hotpoint 24 in. FDW60 Free-standing...

2 Answers

FDW85 Dishwasher


turn on your dishwasher and press and hold the start/reset and on/off buttons simulaneously until the display shows d.of this turns off the demonstration mode.

May 12, 2007 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

FDW80


When the support engineer says press the 'on/off' button and 'start/reset' down together, press very hard. Press hard for 5-6 seconds and a the wording 'demo off' appears for a split second, then resets its self ready for use.

Aug 30, 2006 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...