Question about GE RM24912 Universal Remote Control

1 Answer

Code for the input function on a RM24912 for a 16x12 sanyo tv

I tried all the codes, but can't get the Input function to work,... im confused, and i need help! email me at jimharbis@gmail.com please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you ever get it to work? I'm having the same problem!!!

Posted on Jun 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

This is my universal remote control for the lg tv..i have tried all codes you have given but still the indicator red light blinks as i input the second number of the code.


HI NENITA, Did you try these codes--> 024, 040, 098

Setting Steps: Input Code
1.) Find out the 3-digit code for the TV that you need to control from the "Code list" In case there are several groups of codes available, please use the first group at first; in case that your TV brand has no matching code in the code list, please try the "Search For the Correct Code" mode described later.

2.) Press and hold the "Setting" button at first, then press the "Power" button. Release both buttons after the indicator light illuminates, indicating the status of code input; in case the indicator light is in other status, it indicates that it's yet to enter the code input status, and this step shall be repeated till the light illuminates.

3.) Input sequentially the 3-digit code that you have obtained. The indicator light flashes once when one digit is input. After the input of the code, the indicator light extinguishes; in case indicator light flashes twice successively, it indicates that your input is wrong and you need to input again.

Note: In case the indicator light keeps illuminating after two flashes, you only need to input the correct 3-digit code and do not repeat Step 2, otherwise Step shall be repeated for resetting.

4.) When the Indicator light extinguishes, the setting ends, then you can remotely control your TV with the remote controller.

Apr 17, 2016 | Universal Remote Control Remote Controls

1 Answer

Need remote codes for sanyo tv


press the helpful button Step 1 Insert two AA batteries into the universal remote control if you haven't already done so and then turn on your Sanyo TV. Press and hold the "TV" button on the remote until it lights up.
Step 2 Input the following three-digit codes into your remote control one by one using the remote keypad: "004," "013," "049," "108," "110," "180" and "209." The TV will turn off when you enter the correct code for your particular Sanyo model.
Step 3 Press the "TV" button on the remote once more to confirm the code after you've identified the correct one. You can now use the universal remote to control your Sanyo TV.

How to Set Up the Codes for Sanyo Television and Remote

4 digit codes for TV sets including LCD Plasma and Panel TVs GE universal...

http://www.remotecodelist.com/remotes/sanyo/sanyo_rmtu100.html

Jan 27, 2016 | Sanyo Remote Controls

1 Answer

TV does not respond to universal remote control. Need codes for sonyo LCD TV 32xr8da.and code for tv139f universal TV remote.


You are confused. The codes are stored in the remote. If you use the "code search" function of your remote and can't find one for your Sanyo TV, you may have to try another universal remote. Different remotes have different codes stored in them.

Nov 13, 2014 | Remote Controls

1 Answer

Change input tv without remote


Try to set it up with an other code to your device, and see the effect. With a universal remote control, we can't expect all the functions marked on it will work as it is. Just try to set it up with an other code to your device, and see which code give you the maximum functionality; and select it as. That's all we can do.
0018 0020 0041 0049 0050 0065 0101 0102 0107 0131 0139
0152 0161 0166 0177 0181 0195 0198 0209 0215 0314 0320
0379 0391 0408 0421 0634 0660 0667
These are the general setup codes to Sanyo brand TVs.
Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Feb 09, 2014 | DISH Network Remote Controls

1 Answer

I cant figure out how to put the tv on video 1


With the remote in TV mode, the input button on the remote should change the source (TV, AV1, etc. depending on the TV).

If the input button doesn't work, try a different code for your TV manufacturer. A code that controls the basic functions of the remote may not control the full set of functions of the TV. For some TVs, you can change the source from within the Menu. (It depends on the TV. I didn't notice if there was a Menu button that will open the TV menu on the RCA RCU600M.)

If none of the codes work, check if your TV has a Source or Input button on the unit. See if that button works.

If you have a different remote, please indicate the model.

I hope this helps.

Cindy Wells

Oct 13, 2011 | RCA RCU600M Remote Control

1 Answer

Code for phillips universal


Hi

Im not sure if this is the correct phillips remote.

I assume you know how to input the code?

This should be the one for your Vizio TV - - > 709

Here is a PDF page with all the information on how to input the code and what you can do if it doesnt work.

http://www.remotecodelist.com/remotes/philips/PM335_Codes.pdf

You could do a code search which will go through about 300 different codes until it finds one that works with your TV.

I hope this helps

Mike

Jun 10, 2009 | Philips PM3S Remote Control

1 Answer

Input button on my new universal remote doesnt work


You'll have to try a new code for your TV.

http://66.77.167.109/rcaaccessories/RcaaccessoriesController.do?ACTION_TYPE_ID=ACTION_TYPE_CATEGORY&ACTION_CATEGORY_ID=STR_CATEGORY_UNIVERSAL_REMOTES

Click the remote code finder link on the left towards the bottom of the page.

Select your remote and device (TV in this case) from the dropdowns.

Scroll down the results page to your brand of TV and try all the codes until you find the one that works with all the functions you want.

Best of luck!

Dec 21, 2008 | RCA Universal Remote 3 Device Remote...

3 Answers

RCA RCU-404 UNIVERSAL REOMTE


CyberHome DVD 1024 1023 0816

Mar 02, 2008 | Remote Controls

15 Answers

Sanyo tv codes


The codes listed by Sanyo for my TV won't work in my star Choice remote.
I tried 017 021 039 056 057 058 and 140 as listed by Sanyo.
Any ideas?

Dec 18, 2007 | GE JASRM24912 Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68202 Answers

Cindy Wells

Level 3 Expert

4754 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...