Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

My SHARP AR5316E is blinking error H4 on the screen, Wat can i do..??

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

You can try to clear the error code.

H4 Error code means "Heat Roller low temp", meaning when the machine tried to warm up, the fuser temperature didn't get up to the preset temperature in a predetermined amount of time. This can be caused my many things, including interruptions in the start-up procedure, bad fuser bulb, bad thermistor etc..

To try to clear the code, get into the simulation mode by pressing the "#" key, the interrupt key, the "C" key then the interrupt key again, in rapid succession. When you get to the simulation mode, type in "14" then press start. It may ask you to verify that you want to do this, press whatever it says for yes, then press start key again. When it gets done, push the "CA" or clear all button. The machine will restart and hopefully the code will be gone.

If the code remains, then you will need service on your fuser. Call a local company to come out and take a look at the copy machine, and they will be able to tell you more from their inspection.
Thanks!
Ryan

Posted on Nov 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp m165 error h4-00 give solution


Heat roller abnormally low temperature

Check blinking of the heater lamp
with SIM 5-2.
When the lamp blinks normally:
Check the thermistor and the
harness.
Check the MCU PWB thermistor
input circuit.
When the lamp does not light:
Check for heater lamp
disconnection or thermostat
disconnection.
Check the interlock switch.
Check the power supply PWB
and MCU PWB lamp control
circuit.
Clear the trouble with SIM 14.

May 12, 2014 | Sharp AR-BC260 Color Copier

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

My Photocopier displayed error H4 on the screen


Dear sir
H4 signal is fuser unite problem please call a technician they solve this problem.Just we serve problem location because i am not live your area.
Thanks
Tareq

Aug 12, 2009 | Sharp Office Equipment & Supplies

2 Answers

Sharp ar-c330 with an error code of H4-01. Any


The fuser temperature is low.
Use sim. 5-02 to check blinking of the heater lamp.
if it blinks normally check the thermistor and the harness.
If it not lighted check the heater lamp and thermostat if its defective replace the heater lamp or the thermostat.

Jun 10, 2009 | Sharp AR-C270 Color Copier

1 Answer

H4 problems


Try to reset the error code by pressing : C exp1 C exp1 14 start. if the problem still occur then you should change the heater lamp

Apr 01, 2009 | Sharp AL 1631 Copier

2 Answers

AR5316E error code h2


hi in put # + inroput + c + intrupt + 14 + start

Mar 07, 2009 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp H4 Error message


Hello sir; The code need to reset;
1, press "#", "interrupt", "c", "interrupt" keys.
2, enter 14 then press start.
3, if machine work, please don't forget to give me a good rating.
THANK YOU !!!

Feb 09, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Code: H4-00, H4-0Q


H4-0 The fusing unit doesn't heat up.

You have to reset fuser errors with simulation 14.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.

Jan 25, 2009 | Sharp AR-M350N Copier

1 Answer

H4 error code


H4 is a Fuser Unit heating problem.
This reset is for another model sharp, see if it will work for you.

Press "Clear", "Auto Exposuer", "Clear", "Auto Exposure", the display will go dead... then press "14" (Like your going to make 14 copies), then press "Start".

Hope this works.
Good luck,
Mac

Feb 10, 2008 | Sharp AL-1551CS Printer

4 Answers

Cant get rid of blinking error message, nothing works


The [H4-00] system error popped up when the power went out of the house. I called Sharp tech support (1-630-378-3590) and was talking to their tech support in less than a minute.

The FIX? Just press the following keystrokes:
# * C * This will clear the display error, now press…14, then press the green button twice. This should let your printer start to warm up and you have fixed your problem.

Dec 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers

k24674

Level 3 Expert

8073 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...