Question about Philips 42PF9630A 42 in. Plasma Television

1 Answer

Blue vertical line running down my 42" Plasma TV (42PF9631D/37)

Hi,
During a recent storm, we had a power outage and a leak near my TV. Residual water hit the top and I'm sure a little got into the vents. When the power came back, the TV would not turn on, the green power light would blink red. After unplugging from the surge protector and plugging back in, we did get a picture, but as the TV warmed up, it would go back to blinking red and we would lose the picture. I figured I just needed to leave the TV off and let it dry out. My husband got the super intelligent idea of putting the dehumidifier up on the console, right in front of the screen for hours to "dry it out". Well the TV is working without any problems, except this blue vertical line, right where the humidifier was sitting. Is there any way to fix this?? Would appreciate any suggestions. Thanks!

Posted by on

  • janetony Aug 19, 2008

    My sonic television has a blue vertical line on the screen .How do you fix this ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

I was not sure if the line was going from top to bottom or left to right. the X driver board is for left to right and the Y board is for top to bottom . The Y driver board is a common issue with these sets there is a Y main board and a upper and lower buffer board for the Y axis

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV has blue vertical lines and no picture


I have a 42" Electrograph plasma and it has a 2" black vertical line on the left side of the screen.

Aug 02, 2010 | Electrograph Systems DTS4230 42 in. Plasma...

1 Answer

SOUND BUT NO PICTURE - Philips 42PF9631D 42 in.


Unplug the box's power cord for 5 minutes and wait for it to reset, plug it in, wait another 3 minutes for the box to reboot, then power up the box. If that doesn't fix it then you might have to call your satellite/cable company.

Jul 23, 2010 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

Philips 42pf9631d/37 6 slow red flashes and 3 fast


6-7 blinks means there is an issue with the power supply...
I found a replacement for my 42pf9631d/37
Part # Lj44-00117A
at TSM Inc. for $110.95 with free shipping...
http://www.tristatemodule.com/p-10120-lj44-00117a-samsung-tv-module-power-supply.aspx

Jan 28, 2010 | Philips 42PF9631D 42 in. Plasma Television

2 Answers

Hi, my problem with tv emerson plasma 42 etv4206pdp it does not turn on, after rainy and lighting day. i check the main power area and cant find anything grong. i dont know what else to do. if you had a...


It might have been blown out by the lightening storm. that happened to two of my tvs that were plugged in during a lightening storm. they both, and two dvd players, would not work after, but the ones that were not plugged in were fine. You should unplug your major electronic equipment during a storm, unless you have a power surge plug/equipment.

Oct 04, 2009 | Emerson EWL3706 37 in. LCD Television

1 Answer

PIP problems Philips model 42PF9631D/37.


if you have a cable box and run it thour the cable box it will not work. cable befor the cable box you can do it put a spirer on the line be for the box run one to cable box 2 to the tv ant1 ant2 that is the way you can do it.

Sep 09, 2009 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

Plasma TV with vertical lines


chake to make sure it is hooked up right and not lose

Feb 02, 2009 | Panasonic TH-37PX60U 37 in. Plasma HDTV

1 Answer

Hitachi 42HDS69 Blue Vertical Lines


I think that you have dry solder joints on either the vertical scan board, the focus board, the line output stage, or the chroma panel. Hope this helps.

Sep 13, 2008 | Hitachi 42HDS69 42 in. Plasma Television

3 Answers

Vertical bar on Daewoo Plasma screen


YES YOU HAVE DRY JOINTS UNPLUG FROM POWER SUPPLY REMOVE THE BACK/ INSIDE YOU SHOULD SEE AT THE BOTTOM SEVERAL RIBENED CONECTORS FROM THE SCREEN ITSELF? UNDERNEATH YOU SHOULD BE ABLE TO SEE 2 OR 4 COMPONENTS CAREFULLY APPLY A HOT SOLDERING IRON AN SOLDER THE ONE THAT YOU ARE HAVEING PROBLEMS YOU SHOULD NOW HAVE FULL PICKTURE AGAINE ANY PROBS email me andymay2@msn.com

Mar 09, 2008 | LG 42PX5D 42 in. Plasma HDTV

2 Answers

Daewoo 42 Plasma - Model DT4280NH


I have a samsung 42 in plasma television which is three years old, it has a blue flickering light to the right of the television, sometimes can see some at the top in the middle, hope you can help with this problem, is it repairable.

Sep 02, 2007 | Akai PDP4294 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Philips 42PF9630A 42 in. Plasma Television Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...