Bought a second hand car with a kenwood kdc-w7037 system, but do not have the security code in order to operate it - can you assist me? Karen

you have a problem
one is able to set security code without the remote
without the security code ..not a chance to over ride it
a unit reset wont change the security code

check the user manual link
Kenwood KDC MP628 Manuals
options

back to the flea market see if the seller is there.. for a refund
or contact that flea markets organizers to track down the stall operators details

you can try and contact kenwood car stereo company direct
in your part of the world

this is USAs other countries have their sites
http://locator.kenwood.com/

if you have the gift or sweet talking
they may give you an authorized kenwood repairer to take the stereo to ...and get the code number for you

Contact Kenwood dealer and ask for code there will be a charge for the service

Please give decorder for Kenwood car stereo KDC-M6024 s/n KE 0972RO 100036 Y22-9702-71 Thanks. Marius Popan [email protected]

The anti-theft code cannot be bypassed. It wouldn't be much good if it was so easy to defeat.

The only way to get your radio working is to enter the correct security code. Enter the search term "Kenwood radio code" into your search engine to find suppliers who claim to be able to sell you a code, but they need the radio serial number in order to assist you. Be careful who you use though, some companies just take your money, provide a useless code and refuse a refund so try and research the supplier before sending any money. If the supplier is bad then there will be plenty of complaints online about them.

what is the code for kenwood kdc-x815

Get your money back. It is probably stolen.

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

hii,buddy
click this link, i think this may help you.



http://www.fixya.com/support/r538828-security_unlock_code_kenwood_most_models

recently bought a kenwood kdc-815 car radio from a swamp met. bought it with no security code need security code

Look for a small hole in the face plate. Take the tip of a pen and try holding it in for a few seconds. Re-setting it should work.....