Question about Printers & Copiers

1 Answer

I have a samsung clx-2160 color laser printer. I am getting "transfer belt error". I have also had a fair bit of roller prints on print-outs.

Posted by on

  • Anonymous Nov 19, 2008

    I have a samsung clx-2160 color laser printer. I am getting
    "transfer belt error". I have also had a fair bit of
    roller prints on print-outs.

  • Anonymous May 20, 2009

    I have a Samsung CLX 2160 printer and a message appeared to tell me to change the transfer belt. I have done this but the message on machine is still there. Is there anything that needs to be reset before it will work again.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have changed my magenta toner and the printer wont print saying magnta toner empy. I have tried it several times, shaking the container etc but still cannot print.

Any suggestions??

Pete

Posted on Oct 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Samsung clx-2160 printer is showing transfer belt error. how do i sort this


transfer belt (and other consumables) will reset follow this procedure:

1. go in diagnose mode:
menu - # - 1934 - menu
2. in tech mode -consumables counter - transfer belt -reset
3. after 20 sec. power off and power on
When transfer belt count 60.000 image need to reset.
good lock!

May 28, 2011 | Samsung CLX-2160N All-In-One Printer

1 Answer

I have a Samsung CLX-2160 print. It says "transfer


Hi there,

Try this steps it might help,

1. detach the paper tray and push it back correctly.
2. open the front door and remove toner cartridges, on left inner side u may see a light sensor which detects the toner cartridges.. simply clean this section by a small cotton bud. and in the left side of toner unit there is a sensor door, behind that door there is also a light sensor bulb, which needs to be cleaned by a cotton bud.

Please rate this solution if found useful.

Thanks

Jan 17, 2011 | Samsung CLX-2160N All-In-One Printer

1 Answer

The problem I have with my Samsung CLX-2160 is that it is only the blue which is not printing evenly - it fades out across the page. The others colours + black are all printing fine & evenly. Any...


you'll need to get to the transfer rollers and de-magnetize them. There should be a "Corona wire" that you can slide from one end of the transfer roller all the way to the other. On the other hand, you may be facing a clog in the blue toner channels, so a thorough cleanup of the entire assembly should help. Or, make a full-blue A4/letter sized document and print it out. Maybe the large amount of blue toner can de-clog the channels. Also, keep the old blue toner if it's not empty because this is not a toner issue.

Jan 11, 2011 | Samsung CLX2160 Multifunction Color Laser...

2 Answers

I need to reset the transfer belt counter Samsung ClX -2160


enter tech mode by pressing menu>idcopy>left>right>menu>back>menu ,then in data setup clear all memory and clear count

Mar 09, 2010 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

Replacement transfer belt on my Samsung CLX-2160 not recognised?


enter tech mode by pressing menu>idcopy>left>right>menu>back>menu ,then in data setup clear all memory and clear count

Dec 12, 2009 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

I have a clx 2160 printer and it has come up with message "replace transfer belt" can anyone advise what this is and best place to get one and can i do it myself


Check at www.precisionroller.com they have many of these parts for Samsung. Once you get the new one you replace it by first removing the toners and drum, the transfer belt is next to remove from the front.

Nov 12, 2009 | Samsung CLX2160 Multifunction Color Laser...

1 Answer

Samsung CLX Printer printing unevenly


it is possible that this is a fuser prob, fuser works applying heat and pressure, if the roller, either the pressure roller or the fuser roller is defective this is most likely will happen too, you might want to  check the number of copies or prints made

Mar 22, 2009 | Samsung CLX-2160N All-In-One Printer

2 Answers

Samsung clx-2160


Hi I asked about the CLX-2160 NOT the SCX-4100  I have had no replies yet
Regards
Anthony Showman

Nov 09, 2008 | Samsung SCX-4100 All-In-One Laser Printer

1 Answer

Transfer belt error


Rather than turn printer off, unplug from power source, wait a few minutes and plug back in. It's worked twice for me so far...

Sep 12, 2008 | Samsung CLX 3160fn All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...