Question about Lucent (854250) Modem

1 Answer

Lucent 854, 4 line telephone

Does the Lucent 854, 4-line telephone support caller ID?

Thank you!

Posted by on

  • T3 Toner Sep 05, 2008

    Thanks for answering! We have caller ID set up but the phone numbers do not show on the display when we get incoming calls. Is there anything special that needs to be done for the caller ID to work?

×

1 Answer

Yes !!!

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Static on line 2


your line might need a splitter to make sure that both lines have clear crisp dialtone

Jul 31, 2014 | RCA 25205RE1-A ViSYS 2-Line Enhanced...

Tip

Describing Cheap Dial Up Internet Connections


Today you can find a 56k modem. Transmit data at a speed of fifty-six Kbit / s V.90 or V.92 protocol. You must understand that this is the fastest available dial-up modem. 56k is the limit of maximum bandwidth of a standard telephone line. Be sure to connect to the Internet in areas with less noise power to prevent low-speed Internet connection. At this pace, you can play online games, download large files, make video conferences or movies from a video streaming site. Many of these applications are not compatible with Internet Dial-face. A broadband cable high-speed, satellite or DSL Internet service are better preferences.

You should expect all to take a little time to coordinate a phone connection, negotiate the protocol and, finally, allow the transmission of data. In some places, this process is slower. Note that the entire system consists of three entities - the ISP, Telephone Company, and the user. All have the power to terminate the Internet connection for some reason.

Yes of course. Before the introduction of the latest 3G wireless high-speed cable and DSL broadband by satellite, it was a bestseller. Today, it's always a good option for remote areas that lack the technology or broadband fiber-to-date. Satellite networks are suitable for rural people who want to get broadband connections faster and reliable. In urban and rural areas, attracts fewer users dial-up packages which do not require very fast network and you want the lowest cost monthly cost for ISPs.

This technology is very similar to digital subscriber line (DSL), because they use a phone line. However, DSL is more preferable because it is much faster and can use the website and answer a call on the same telephone line. Unfortunately, dial-up does not work the same way, the caller will often find your line is busy. In terms of broadband connections, ADSL first. Offers the latest technologies that offer greater speed and accuracy, such as ADSL, SDSL, VDSL and HDSL.

on Jan 20, 2011 | Modems

1 Answer

Voice Mail Pick up


Changing the vms hunt delay on a Partner ACS system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#505"
the display should say VMS Hunt Delay and mode:
enter 1 for day mode or 2 for night mode
enter line you want to program in 2 digit format (line 1 =01)
enter number of rings (2)
press feature "00" to logout

May 02, 2013 | Avaya Lucent / Partner 206ec Expansion...

1 Answer

I am configuring a pri ckt in mitel sx200icp i cannot make outbound calls i have programmed pri card as per carrier in form 42 with NI2 - NI2bell have tried all procol variant incoming is fine


It sounds like the outbound Caller ID is not set up properly in form 22. You will need to insert *6 into the dial string. If this isn't set up, many carriers will reject the call as it doesn't see the correct outbound caller ID.

Sincerely,
Mark

Mar 16, 2011 | Mitel PRI Card T1 E1 (9109615001)

1 Answer

Cannot receive phone calls on a dsl setup


There must be DSL Spliter inbetween telephone line & Wi-fi modem. Please check whether you have connected telephone instrument line with that Spliter or not. According to me, Telephone instrument should connect to telephone line option on DSL Splitter to use same telephone line as internet as well Telephone.

Mar 03, 2010 | Modems

1 Answer

I need an operating manual for Lucent 854


Try this Site, and Request a Manual for This (which is an Old Manual):
http://www.skutchelectronics.com/old_manuals.htm
Check these folks out, If you don't get what you need get back to me, as I may have another Link for you.
Good Luck

Feb 20, 2009 | Lucent (854250) Modem

2 Answers

Agere All 56K Modem


I have checked the telephone line, it is working alright and it is sure that I have plugged the line into IN port.

Oct 19, 2008 | Agere All 56K Modems: 56K V.92 Lucent/...

3 Answers

Modem Purchase-Reg


If no brand/model then your next best bet is to get the chipset number and download a generic driver. The chipset is the largest IC (LSI) on the modem board. Most often, they are made by Conexant, ESS, Lucent to name a few. Once you have determined the chipset number (ex. Conexant HSF1 CX11252-11), google for modem drivers of the chipset number or try the chipset manufacture's website. Good luck and kind regards.

Aug 28, 2007 | Modems

2 Answers

Disconnected


the issue can be resolved basing on the feedback from you. the possibility: if the telephone line u are using for both voice and data transfer you will be get disconnected when a caller calls you on the line. So check up with the telephone company to enable call waiting facility for you line.

Sep 08, 2006 | Jaton WinCOMM V.92 Modem

Not finding what you are looking for?
Lucent (854250) Modem Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Lucent Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...