Question about Computers & Internet

3 Answers

Emachine enter password to unlock system black screen password check failed reffer toproduct guide motherboard ect fatal error help me pleSE

Posted by on

  • 3 more comments 
  • kelly beach Nov 02, 2010

    ENTER PASSWORD TO UNLOCK SYSTEM I TRIED REMOVING BATT/ANDCMOSJUMPER FOR 15 SEC/REMOVING JP1 AND REPLACEING IT AFTER PUTTING ON OTHERPINS AND REPLACEING.NOTHING IS WORKING PLEASE HELP

  • kelly beach Nov 02, 2010

    W3507 DESKTOP PC INTEL CELERON D PROCESSOR 352 ALSO I DONT THINK THE WIRES AND THE GREY BELTS COMMING FROM THE DRIVES ARE HOOKED UP RIGHT GOING CRAZY

  • kelly beach Nov 02, 2010

    some emachines have a dip switch on the motherboard to clear the passwords. if you don't know how to clear the CMOS, you will need to reset the jumper. To do this, you would have to open up the computer case, locate the CMOS battery and there should be a jumper right next to it. Take it off, gently so you don't bend the pins, and then wait for like 15 seconds then 'park' the jumper (put it back on) DID THIS DID NOT WORK

  • kelly beach Nov 02, 2010

    THE ERROR I AM SEEING IS PASSWORD CHECK FAILED
    REFFER TO THE PRODUCT GUIDE AT HTT//SUPORT,INTER.COM/SUPPORT.MOTHERBOARDS/DESKTOP/FATAL ERROR...SYSTEM HALTED

  • kelly beach Nov 02, 2010

    DID YOU GET NY INFO

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello, Kelly.

Boot your system and press F8 repeatedly until you are able to choose Safe Mode. Once in Safe Mode, try to login with the Administrator account (leave the password blank). If you are successful, you can then reset any password for any account by choosing Control Panel and User Accounts.

Hope this helps.

Posted on Nov 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,566 Answers

Hello Kelly,
Can you tell me the exact error you are seeing?
Also, please provide us the exact model of the motherboard.
Thank you.

Posted on Nov 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,069 Answers

Some emachines have a dip switch on the motherboard to clear the passwords. if you don't know how to clear the CMOS, you will need to reset the jumper. To do this, you would have to open up the computer case, locate the CMOS battery and there should be a jumper right next to it. Take it off, gently so you don't bend the pins, and then wait for like 15 seconds then 'park' the jumper (put it back on)

Posted on Nov 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It keeps asking for current password i dont know it


You can remove or change the Window's User or administrator's password and privileges. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

Mar 22, 2013 | HP Mini 1000 Netbook

1 Answer

Password reset acer aspire one d250 wont boot


Try these WEB sites for removing hard disk password.
HARD DRIVE PASSWORD UNLOCKING - Purchase
http://www.hddunlock.com/purchase/ A-FF HDD Unlock Wizard (HDD Password unlocking - Free)
http://www.hddunlock.com/download/

Mar 14, 2013 | Computers & Internet

1 Answer

I have a problem on this cod c000021a fatal system error i have window when i shut down my computer show blue screen with this cod c000021a fatal system error and computer restarts i need help for solve...


Blue Screen system error. If you've been running windows Xp, please do the following:
1. Insert Windows XP CD in the Pc.
2. Restart the PC and while in Bios, go to Boot Priority and select Boot from CD as your first priority.
3. Save and exit.
4. The PC restarts and follow the instructions on the screen. (Press any key to boot from the CD).
5.After system has finished, such will happen <Enter-To Continue R-Repair ESC-Cancel>.
6. Choose R to repair.
7. A black screen pops up, just read and type 1 and wait for the next step (password).
8. Put in your Admin Password or press "Enter".
9. Then type CHKDSK and press "Enter".
10. the system will repair the errors within the HDD and windows and later restart the PC. Good luck

Jun 21, 2010 | Dell Inspiron 1501 Notebook

1 Answer

Someone put a password on my system and when i turn my computer on it goes to a black screen asking to enter your password to unlock system how do i get the password or take it off


remove the cover - observe static electricity precautions - remove the battery from the motherboard ... or slip a business card between the contact. Wait several miniutes - remove the card. Plug the machine back in and reboot.

"Someone put a password on ... "... interesting concept. Snuck into their house or office, boot'd their computer to setup and slipped a secret password in so they cant use their computer ...

This IS your computer we are talking about, right?

Thanks for using fixya.com

a

Oct 25, 2009 | E-Machines eMachines Desktop PC

1 Answer

Windows cannot loaded at bootng time


check the RAM use it on different slot or use a different RAM

Oct 13, 2008 | Intel D845WN (KD845WNPAK10) Motherboard

3 Answers

Error on screen


If you dont know the password you have to clear the bios to unlock it. Post the motherboard model number and i'll tell you how.

Jun 12, 2008 | Intel Motherboard

2 Answers

Unlock TV


If you forgot your password for this feature, press the following buttons on the remote, one at a time. (Note: You must be in the password entry screen) Press, Mute, Display,Clear and Reset, this unlocks parental controls and you can now re-enter a new password.
OR TRY THIS..
Press and hold Menu on the TV AND volume down on the remote for 3 seconds. Nothing will appear on the screen, and the Parental Controls will unlock, and you can re-enter a new password with the LOCK PARENTAL CONTROLS
Bill

Jan 24, 2008 | RCA TruFlat 27F520T 27" TV

3 Answers

Emachine windows xp


First, its neither a microsoft problem nor a E-Machine problem. It definitely seems that you or someone else has accidently set a CMOS password, which you are not aware of. And this is the only reason why you are getting a 'Enter Current Password' prompt. Now, let me explain to to you what we need to do. We would need to reset the CMOS Password. There are various ways to reset the CMOS Password, which requires some advanced troubleshooting steps and cannot be dictated here. Hence I would request you to call up E-Machine again and don't mentions the exact issue to them. Just tell them that you want them to help you reset the CMOS Password. Also, just in case someone might have made changes to the BIOS settings, get you BIOS settings set to default. Again, in case they are not able to help you on this, please feel free to initiate a chat session with me from the Fixya homepage and I would love to help you on this. Good Luck

May 24, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...