An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: one touch dailing or something
You are correct that the manual is "really ugly." We do not even provide them to our customers because they are so difficult to understand for typical end users.
You can program unused buttons as One-Touch Dial (for phone numbers or feature codes) or Direct Station Select/Busy Lamp Field buttons (DSS for short) to monitor the status of a specific extension and to call that extension directly.
Press PROG and select the button you want to use. Press 1 to make it a DSS button or 2 to put a phone number in it. Then dial what you want the button to monitor or dial and press AUTO DIAL/STORE.
We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376. (Our manuals are much better, too!)
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Start the Email app. Look for it in the Apps drawer.
If you've run the Email app before, you see the Email inbox and you're done.
If you haven't yet run the Email app, the first screen you see is Account Setup.
Type the e-mail address you use for the account.
Type the password for that account.
Touch the Next button.
If you're lucky, everything is connected and you can move on to Step 5. Otherwise, you have to specify the details as provided by your ISP, including the incoming and outgoing server information, often known by the bewildering acronyms POP3 and SMTP. Plod through the steps on the screen, although the tablet really just wants to know the incoming and outgoing server names.
Your ISP most likely has a support web page for setting up e-mail accounts. That page may list specific account setup information for an Android device. Use it.
Set the account options on the aptly named Account Options screen.
You might want to reset the Inbox Checking Frequency option to something other than 15 minutes.
If the account will be your main e-mail account, place a check mark next to the Send Email from This Account By Default option.
Touch the Next button.
Give the account a name and check your own name.
The account is given the name of the mail server, which may not ring a bell when you receive your e-mail.
The Your Name field lists your name as it's applied to outgoing messages. So if your name is really, say, Cornelius the Magnificent and not wally78, you can make that change now.
Cannot send email but able to receive Typically, POP based email accounts have the same address for incoming and outgoing email servers. However, sometimes the email service provider might have a different outgoing email server which has a different username and password (next point). Please check with your provider for details if you cannot send email but can receive.Is the outgoing email server address correct? The outgoing email server (SMTP) address needs to be correct for you to send messages from the account. You can find this information in the email you have received from your web host.
The outgoing email server address would typically be based on your web site's address, unless the server has been configured differently. Thus, if your web site's URL is www.my-web-site.com, the outgoing email server address would be either my-web-site.com or mail.my-web-site.com (substitute my-web-site.com with your actual domain name).
You have to setup a groupDial.First setup yur one touch dail numbers under user mode-Tel registration,one touch speed dails.Leave at least 1 dail open and program it to a group dail number.Under usermode-tel registration select group dail and select your group from the one touch buttons.
Press the additional funktion key and the dataregistrayion key.Dataregistration will apear on the screen.Press the arrow left ntil telephone registration apear on the LCD.Press ok,One touch speed dail will be displayed press ok and enter the one touch speed dails.
hi press the FM burron for one touch recording exit other apps comes becuase u cant do two apps one time so press disconnect button befr u start something diffrent . or may be u r touching the lowest touchpad menu bar with ur finger...so phone htinks u rtrying to open up something else
open your email click tools up top then accounts the click on your account and click properties make sure were it says outgoing it says smtp + whatever it says on incoming without the pop
e.g. incoming - pop.tds.net
outgoing - smtp.tds.net
if this doesnt work go to your service provider site it should say on there something about fixing your email settings or connection