Question about Bosch Washing Machines

1 Answer

Fills with water then does not rotate, also does not spin

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check for large items of clothes being tangled if the Bosch washing machine doesn't spin. The weight could not be evenly distributed in the drum and the spin cycle will have been disabled to prevent damage to the clothes..

Load the drum with large and small clothes together and run the entire washing cycle and spin cycle again.

Add more powder and run the entire washing and spin cycle again if you haven't found tangled large items, but the spin cycle still failed. This indicates the amount of cloths was too small.

Add 1 tablespoon of fabric softener to 1 pint of water and pour it into the main detergent dispenser if there's no tangling and the load was a normal size. The cause would have been excessive suds because of too much, or the wrong kind, of detergent. Use HE (High Efficiency) detergent in Bosch washing machines.

Posted on Nov 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It will fill up with water and drain but won't spin or turn at all.


hello Katie,

Your water level sensor is faulted, or it could be the water level selector switch. Next time it happens, try rotating the water level selector between load sizes. If the machine then starts to agitate, then you are looking at a bad switch. If rotating between load sizes doesn't do anything else, then it could be the switch AND/OR the level sensor. The water level function locks out the motor (agitate / spin) until level requirement has been satisfied.

Sep 10, 2010 | Washing Machines

2 Answers

I have a whirlpool duet washer that will not spin at high speed and shows error code f 06


Error F06 is Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes. Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness

Oct 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fills with water and that's it!


sounds like the timer is not advancing. Can you physically rotate the timer until the next thing (or anything different) happens?

Jul 09, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Hotpoint Aquarius 1100 WM63. fills with water...I dont think it is heating water...rarely rotates and spins (saw it once in early stage of J prog only) seems to fill and empty but no rotate or spin....


if it fill with water then stops it is the ellement the machine first fills turns the drum then heats up the thermostat cuts in and the it emptys rinses and spins so if it does not get to temp it will stop or continue to wash forever

Jun 27, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

My washer does not spin or move during wash cycle the moter runs but nothing is moving.


Hi, this motor has faulty windings, causing it to lock up and not rotate the drum/basket. replace this motor asap if possible.

May 29, 2009 | Kenmore Washing Machines

1 Answer

Figidare dishwasher


It seems other posts were correct - The upper arm doesn't spin all the time. Once I learned that, and let the dishwasher cycle through, I saw that the upper arm does spin. So, there wasn't a problem with the upper arm afterall. That doesn't solve my crusty dishes problem, but that may have something to do with the soap we're using. We're going to try changing that next.

Dec 27, 2008 | Dishwashers

1 Answer

Will not spin


Hi- if the water does not drain from the m/c, then it will not spin.Check to see if the pump is working.
Select drain or empty and the water should pump out.
If it does not, then you have a draining problem.
Hope this helps.

Nov 26, 2008 | Washing Machines

1 Answer

Washing machine wfm 2010 not rotate just fill and drain water


sounds like the carbon brushes in motor,Or motor has had it.

Oct 11, 2008 | Bosch Washing Machines

1 Answer

Washer fills, drains instead of agitating, fills, etc


ON THIS MACHINE WHEN IT AGGITATES MOTOR ROTATES ONE DIRECTION, WHEN IT PUMPS OUT AND SPINS IT ROTATES THE OPPOSITE DIRECTION. YOUR MACHINE IS ROTATING THE WRONG DIRECTION WHEN IT FILLS., INDICATING THAT THE TIMER IS SENDING VOLTAGE TO WRONG WIRES. SOLUTION , REPLACE TIMER.
PS: MAKE SURE ALL WIRES ARE PLUGGED IN TO MOTOR. WHILE THIS IS UNLIKELY , I HAVE SEEN THIS BE THE PROBLEM.

FXIT

FXIT

FXIT

Nov 24, 2007 | Admiral AW22 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Carmen Mikulic

Level 2 Expert

415 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...