Question about Belkin (F5D7230-4) Router (587009)

2 Answers

Change password Hello, I lost my HEX can I change my password?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 68 Answers


You can change you password by accessing your belkin admin page. But then you cant ccessit using your wireless connection , therefor you must connect in directly to your computer using an ethernet cable or usb. Im sure you know the nature of Wireless Encryptiom,that if you dont know your KEY then theres no way for you to access it .: Work around if you cant hard wire is to reset you belkin by pressing the reset button at the back. By default there is no encryption for belkin or you can check there website for manuals or steps to work on it.

Let us say you are now hard wired. Go to start > run > cmd > type in ipconfig /all and check your default gateway ip address.. Open your browser and type you default gateway in there ie In your belkin page

In there youl have the option to change and view your wireless encryption.

Hope that the steps above helped you in any way.

Pls let us know if you have further questions.


Posted on Jun 12, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

There is a small button on your router. Press it in and hold it until your lights flash on it. It will take about 45 seconds.

This is a factory reset. Now you can connect to it either by plugging into it or wirelessly. It will be an unsecure access point with the SSID of belkin.

After you connect just open up your favorite browser (I use Firefox) and type in the address

Change your password, choose a wireless SSID that is better than belkin. Set your security ( I prefer WPA/PSK )

Save your settings.

Posted on Jun 12, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i change my routers password?

Hello. =)
Open your web-browser and enter ", or" and then hit enter. This should give you access to your Zyxel's dashboard, enter your username and password then hit enter. From here you can change you can change your password to whatever you like. Hit "Wan Setup"->Enter your new password in the password field and hit Apply. Done.
Hope this helps! :)

Aug 06, 2013 | Zyxel Computers & Internet

1 Answer

I lost my D-Link Password?

If it's the wireless password and you can still access the settings, you can change or add an additional wireless password (so you don't have to worry about changing it on your laptop). Or it might display the password on the security page, if it isn't asterisked out.

If you lost the administration password, you'll have to press the reset button, its a hole in the back of the router or bottom, try shoving a paperclip point into that. Hold it down for 30 seconds. Then, in your web browser, go to, leave the user ID blank and type admin for the password. Since everything is set back to default, you'll need to completely redo your security settings and change the wireless password in your laptop to comply with your changes.

Hope this helps!

Apr 13, 2011 | D-Link DIR-615 Wireless Router

2 Answers

Reset password

What password are you referring to; Wireless Security or Web password to access the Router's interface?

If it's the 2nd; Open (default IP) on your web browser, type username: admin and Password: password. Click on Password then change the default password.

If it's the 1st; Open (default IP) on your web browser, type username: admin and Password: password (put you correct password if you change the default password).. Click Wireless on the left, Enable Encryption WEP or WPA; for WEP 64 bit you will have to use 10 HEX, meaning 0-9, A-F (e.g. common is phone number). If WPA; password can be set from 8-64 characters long.

Angel .

Jun 30, 2010 | Trendware TRENDnet TEW-435BRM 802.11g...

2 Answers

Lost password/unknown security key

Connect your laptop to router using ethernet cable open internet explorer & type press enter it will take to login screen and if you havent changed the username and password for the router it should be admin as the username and password as password. once in the router you can change the network key to anything as desired by you.

Jun 04, 2010 | NetGear DG834G Router

2 Answers

How do you change the password on the router?

Which one? The login password to the router (admin/password) is changed under MAINTENANCE Set Password.

The Wireless password is changed under SETUP Wireless Settings.
In that one, if you're using WEP, you get to see the 10 or 26 HEX character key. Be sure to read the Wireless help screen on the right side of the page.


Nov 17, 2009 | NetGear WGR614 Wireless Router

2 Answers

I want to put a password on my D1-524 router

then you need to login on your router. connect to it with the routers ip address and login with usr: admin and pwd admin, then go to system and change password.

Oct 12, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Want to change my password

If you have not changed the default URL for the router web interface it is or . Insert that address in your browser. Enter the user name and the old password. Then look for the Administration Tab, inspect all subtabs untill you find the place where you change the password. Change it and save configuration.

If you have reset the router
Default username is admin
Default password is admin or no password (blank).

Hope it helps.

Sep 28, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Lost Password

if you contact the service provider they will reset the password for you and guide you how to do it. Then once the password is reset you can change it again to one of your own. Contact them outling your problem and they will tell you how to get to the settings to change it. I hope this helps

Dec 24, 2008 | Edimax BR-6216Mg Wireless Router...

2 Answers

WRT300N password lost reset? no software


Reset the router as factory setting,after words you can change the password OR Just try the user name ---root & password is password.

May 18, 2008 | Cisco (1841) Router (cisco1841)

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides