Tappan Range 560S111PO1 Timer buzzer won't turn off
The timer is continuously going off. All I've been able to do is set the timer for one hour and 59 minutes to get some relief before it goes off again. Plug and unplug didn't work. Please note that this must be an old Tappan model #560S111PO1 and is not TGF363, but I couldn't post without one of the listed numbers. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Clock uses a 12-hour cycle with a.m. and p.m.
1. Check that the oven is off.
2. Press CLOCK.
3. Press TEMP/TIME "+" or "-" arrow pads to set the time of day, including a.m. or p.m.
4. Press CLOCK or START The Timer can be set in hours or minutes up to 12 hours and 59 minutes.
1. Press TIMER.
2. Press TEMP/TIME "+" or "-" arrow pads to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of countdown.
4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the oven will turn off.
5. If the TIMER is running, but not in the display, press TIMER to display the countdown for 5 seconds
Delay Start: The Start Time keypad is used to enter the starting time for an oven function with a delayed start.
Hope this answers all you questions about your stove.
To set the time, turn and hold the Timer knob to the clock symbol = and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.
First try to unplug it and give it 5 minutes and then plug it back in. If that doesn't work then you'll need to check the wiring with it unpluged. If there is nothing obvious then you'll have to replace the main board..... also knows as a ERC or Electronic Clock Timer
hello, You can set the timer on a range slow cooker to automatically
switch to a warming setting when you estimate foods will finish
cooking. The programmable features allow you to leave food stewing at
home while you are out of the house, freeing up your day. Set the timer
on a range slow cooker to let the kitchen appliance do all the
work, and come home to a fully cooked meal.
Fill the insert of the range slow cooker with food and cover it
with the lid. At least a quarter of the insert should be filled with
liquid to keep the environment moist during long cooking times.
Press the "On/Off" button on the left side of the electronic control
panel in the front of the appliance. This will turn on the slow cooker
to the low heat "Warm" setting.
Press the "Cook Time" button on the right side of the electronic
control panel to add hours to the timer which will show a total time in
hours with a red digital display. Continue to press the button until
the display indicates the desired cook time in one-hour increments up
to 10 hours. The cooker will automatically adjust the temperature
setting based on the amount of time you programmed on the timer.
Cooking times of six hours or less automatically start on "High" heat
and times of seven hours or more will start on "Low" heat. A small
indicator light will come on below the word to tell you the cooking
When the clock is first connected, the display flashes ( 0.00)
and (?) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol (?) and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
It is on page 6 of manual
I took the top of range apart to see if I could unplug the buzzer. Wasn't sure which wire it was so I just unplugged the bottom four wires one at a time.....don't really know what it did but it stopped buzzing and all the wires are plugged back in. Only thing I can think of it must have re-set something cause it works fine now
I have the digital timer oven and also cannot find the manual. You have to set the bake time timer, I think for 3 hours. Then you set the oven knob on clean and turn on the temp knob, probably to full but I don't think it matters. When you engage the lock, the clean light should come on/ When the oven reaches high temp, the lock light will also be on.