Question about RCA TruFlat 27F520T 27" TV

1 Answer

My tv turns on and off but there is no sound or picture.

When i turn on my tv there is no picture or sound but the display shows the channel number and mono in red.this occured right after my power went out. can anyone please offer me some explanation or solution.

Posted by on

  • 7 more comments 
  • loislee Jun 16, 2008

    sony trinitron



    channel 1 shows

    no sound

    no picture

  • Anonymous Jul 11, 2008

    How do I get my tv off of mono. My power to my tv is fine.

  • Anonymous Jul 11, 2008

    has power but no picture or sounds

  • Karen Cheah
    Karen Cheah Jul 12, 2008

    my TV turn off and turn on again worked for day, next morning turn on fine then went off and wont turn on at all?

  • KINGFMONEY1 Jul 27, 2008

    I ABLE TO HOOK UP A DVD PLAYER BUT WHEN I PUT THE CABLE ON ONLY A BLUE PICTURE APPEARS WITH NO SOUND AT ALL

  • Anonymous Aug 18, 2008

    My television

  • Anonymous Aug 20, 2008

    tv has channel displed and mono in red. change channels on it's own. called cable company. cable company says call maker of tv.

  • kpieters03 Aug 23, 2008

    I get channels 2, 3, 4, 5 and 6...and now 14 but every other channel is blue with MONO in red...no sound and no picture...

  • britth64 Aug 23, 2008

    My tv turns on but only the voice for about 8 seconds and then shuts off

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

YOUR POWER SUPPLY IS THE MAIN CAUSE OF THE PROBLEM,SO YOU MUST COLDSOLDER THE MAINBOARD OF YOUR TV,IF NOT WORKING REPLACE THE CPU.

Posted on Jun 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the channel my Sony Trinitron TV turns on to?


hit menu button on your remote, navigate to channel setup menu. on the sub-menu, set channel fix to your channel that you require. now when your tv powers up this will be the default channel. if this doesn't fix your issue then try cycling through video inputs tv/video button on your remote.

Nov 10, 2013 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Sharp tv #27sc26d no picture have sound


There is a voltage loss in the main board. It will be best to contact any experienced service technician, as the work is a skilled one.

Jan 03, 2013 | Sharp 27SC26B 27" TV

1 Answer

Sound ok but no picture


see the b. diagram and test the power supply ;transistor, fuse, filter, switch, c.breaker rectifier,IC regulator voltage.
measure the horizontal output =125vdc
all other circuit:12vdc
color:12vdc
10_18_2012_12_43_22_pm.png

Oct 17, 2012 | JVC Standard (CRT) Televisions

1 Answer

TV Flashing from Channel to Channel Non-Stop. Problem with the RCA F32689 32" TV My TV started jumping from channel to channel non-stop. There's no picture or sound - only channel numbers changing...


If still under guarantee take it back.
If not this sounds like a workshop job. If more than five years old (the TV, not you!) and you can afford it, junk this set and get a new one.

Sep 21, 2011 | RCA F32689 32" TV

1 Answer

My TV is a WEGA KV-32FS100. A channel number, 3, is showing on the main picture. How do I get rid of this? This is not a PIP set. This has shown in the past but disappeard after a few seconds. Not it...


On the Sony TV remote control is a button labeled "DISPLAY". Push that button to cycle through the different display options until the on-screen display turns off.

May 16, 2011 | Sony Standard (CRT) Televisions

1 Answer

How to turn off channel number displayed in TV screen


Press " i " (info) button on Sony TV Remote so on-screen display will disappear.

Jun 09, 2009 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Sharp 32'' tv -no raster showing channel numbers only


since you have sound and display it's not the hivoltage. You're electron guns are not being turned on. Most likely the IC which biases the guns or the IC which contains the biasing resistors.

Jan 28, 2009 | Sharp 25R-S100 25" TV

1 Answer

Panasonic TV-Sound but no picture.


Hi,
    According to the symptoms, There is a problem in vertical out section.Just check it there must be a capacitor that has been burst or leak.And second one reason could be the malfunctioning of vertical IC.Which is also in the vertical section.

Thanks for using fixya.

Dec 01, 2008 | Panasonic CT-27D12D 27" TV

2 Answers

No pictureq


maybe you have defective heater line tru the CRT board! check the heater line if have a 4.5 volts or 4.8 volts! can you see the back of picture tube!?! they lights coming out at the neck of the tube! if no light! you have defective heater supply!

Oct 16, 2007 | Orion1934 19" TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...