Question about Uniden BC895XLT Base Scanner

1 Answer

It quit scanning stay on one channel

Uniden bearcat BC 244CLT 10 band 30 channel

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

You probably locked out all the banks. Look at the top of the display, you should see numbers from 1 to 10. If you don't, press 'scan', then press each key that corresponds to any missing numbers (I'm guessing that all but the number '1' are missing). As you press each key the number will reappear at the top of the display.

Posted on Jan 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bc60xlt-1 30 channel 10 band radio scanner uniden bearcat just wanting to know how to program and the channels i can progam.. thanks Rose


Rose: All the information that you need is in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

You can find a comprehensive database of active frequencies in your area, and a lot of other useful scanning information here:
www.RadioReference.com

Bill B.
Listening in since the 60's

Feb 26, 2011 | Uniden BC60XLT-1 Handheld Scanner

2 Answers

Need a free printable user manual for Bearcat scnner BC142XL


Its so easy to use you really don't need a manual for the Uniden BC142XL scanner.

Turn it on. Push the "MANUAL" button to stop it from scanning.

Push number 1, then push "MANUAL" again. This should leave you on channel one.

Using the keypad enter the frequency you want to monitor, then push "E." Press "REVIEW" at anytime to see what frequency is programmed there. If the review button flashes 000.0000 on the LED readout display, you might be entering an invalid frequency. Refer to the list of acceptable frequencies in the Frequency Range Bands below.

Push "MANUAL" to step to channel number two. Enter the frequency. Push "E." Push "MANUAL" to step to channel three. Repeat this process until all the (10) channels are full, or you've run out of frequencies to enter.

Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two seconds after the conversation has stopped.

Frequency Range Bands:

20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band

If this helps, please take a moment to give us a rating -- and a rating of "very helpful" would be greatly appreciated.

Sep 06, 2009 | Uniden BC-95 XLT Scanner

2 Answers

Need a starter frequency guide


The best frequency database is at

www.radioreference.com

Aug 11, 2009 | Uniden BC60XLT Handheld Scanner

1 Answer

I cant reprogram my channels back in ,think its locked


Here is a link to get the full manual... it should allow you to remove the lo on the channels... www.uniden.com/pdf/BC60XLTom.pdf

Jun 05, 2009 | Uniden BC60XLT Handheld Scanner

2 Answers

BEARCAT BC 175 XL--Where might I download manual? Thanks


hi . i w given a Uniden Bearcat 175XL 16 channel scanning radio. the OPERATION buttons are: PRI SPEED WX LIMIT SRCH HOLD DELAY LOCKOUT and in orage color: SCAN MANUAL. please help. the only thing i can get to hear is the WEATHER CHANNEL. i cant even hear the squelch. can u help

Mar 21, 2009 | Uniden BC340CRS Base Scanner

2 Answers

I have an uniden bearcat 30channel 10 band


The BC60CXLT is a 10-channel scanner. Here is a link to the owners manual:

http://uniden.com/pdf/BC60XLTom.pdf

Bill B.

Mar 04, 2009 | Uniden BC60XLT Handheld Scanner

8 Answers

Uniden Bearcat BC60XLT 10 Channel 10 Band Radio Scanner with L/O on every channel #


Turn off power, hold down the 2, 9 & L/O buttons while turning the power back on.

Aug 09, 2008 | Uniden BC60XLT Handheld Scanner

1 Answer

Uniden/bearcat BC-100


If it's indeed a BC-100 and not a BC-100xlt, the 16 channels are easy to program and use.
1. Press MANUAL 3 MANUAL with 3 being the number of the channel you wish to program.
2. Enter the frequency for that channel (e.g., 162.55) followed by ENTER.
3. Follow the same sequence for each channel you wish to program, except that pressing MANUAL after you program a channel will advance the scanner to the next channel.

To scan, simply press the SCAN button after your frequencies are programmed.

Bill B.
San Antonio

Jul 15, 2008 | Uniden BC248CLT Base Scanner

Not finding what you are looking for?
Uniden BC895XLT Base Scanner Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...