Question about Xerox WorkCentre PRO 128 Copier

1 Answer

Xerox 416 Would you happen to have a service manual for this copier?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

No longer sorry, I left that job and have no documentation .
You can go to a site called The Parts Drop. Just google the parts drop, call Britt, I would think he would have one.

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Workcenter PRO 416 and display says change toner but after replacing toner,the same message comes up.


I had that happen before. It turns out the refilled toner cartridge I was using was the problem. When I bought the cartridge I thought I was getting a new one. They were refills. You may want to try another cartridge if you have one.
Good Luck

Nov 30, 2010 | Xerox WorkCentre Pro 416 All-In-One Laser...

1 Answer

I have a xerox workstation pro 416 and it showing me memory error, how do i clear it and install its software again


This sounds like you are connected to the copier.
First check your jobs and see if you have too many still in the machine. Try to delete some, and see if it clears.
The menu selection can lead you to the different map locations of functions that can be changed.
If this machine has memory moduals on the mother board, reseating the modual sims may help correct this type of problem.
To access the back cover, there are many screws to take off the back cover. Unplug the copier first before doing any service work to the machine. There may be a small cover on the back to pull the simms and reinstall them.
If it is machine software you like installed to the machine itself, only the service representative can preform this function
Good luck.

Mar 30, 2010 | Xerox WorkCentre Pro 416 All-In-One Laser...

1 Answer

Manual


Google a bbusiness called " the parts drop" Give Britt a call, he probably will have one.

Jul 10, 2009 | Xerox WorkCentre PRO 128 Copier

1 Answer

Is it possible to reset pro 416 out of this problem.


Limited information provided.<br /> Pressing 8 start may give you a error code. Or a 8 plus stop button.<br /> If the machine has a C4 code, this may require machine software to be installed on the machine in order to correct problems. The scanner will not operate correctly even with a new scanner. The software needs to be installed by the service representative in order to align the correct software to main board, to correct laser heas assay.<br /> Good luck.<!-- from fixya rte -->

Jun 18, 2009 | Xerox WorkCentre Pro 416 All-In-One Laser...

2 Answers

CA1 error code on my xerox workcentre 416


Pretty much yes. That message is that the Polygon mirror, is not spinning. That is the motor/mirror assembly inside the laser unit. There is a slight chance it is just sticky, but that motor failure is not uncommon at all in that product.
You can try going on google and searching a business called " the parts drop" and call, ask for Britt. There are 2 different lasr units for that machine, simply called a large and small laser unit.

Aug 22, 2008 | Xerox WorkCentre Pro 416 All-In-One Laser...

2 Answers

Xerox Workcentre Pro 416 P


This would be the first thing to try..


  • Press the 0 and 8 keys simultaneously and switch on.
  • Input 400 using the numeric keys, and press the enter key.
  • Change displayed status counter to 0, and press the enter key.
  • Switch the machine off then on. Check that the machine returns to the normal standby mode. If the machine does not return to normal standby mode, perform the following checks.
  • Feb 18, 2008 | Xerox WorkCentre Pro 416 All-In-One Laser...

    6 Answers

    Xerox 416 Fuser


    Is it getting thru the "pinch of the fuser and catching on the stripper fingers? If so clean the fingers, ensure they are not worn or tips broken.(Running sheets with dark lead edge can cause sheets to stick to rollers,try running blank sheets to clean up, if they get thru then try normal copies)
    If the sheet stops before entering the rolls more likely to be dirty entry chute, drive problem or sensor problem....need more detail

    Jan 25, 2008 | Printers & Copiers

    Not finding what you are looking for?
    Xerox WorkCentre PRO 128 Copier Logo

    Related Topics:

    183 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Xerox Printers & Copiers Experts

    Whit
    Whit

    Level 1 Expert

    185 Answers

    iteminconline

    Level 2 Expert

    110 Answers

    Philip Hughes

    Level 2 Expert

    63 Answers

    Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...