Question about Siemens SX66

1 Answer

I go to the WM6 and now my SX66 don´t find the signal, plz i need a solution

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I would recommend using Pocket PC 2003 version instead. WM 5 or 6 may have significant issues with phone compatibility. If you can go back to 2003 and the phone still doesn't work there may be a hardware issue, then you need to replace or repair. Replace is usually the better option. Search ebay.com if that is what you need.

Below, instrutctions on getting ROM for PPC 2003:

Try www.xda-developers.com and ebay for ROM upgrades. There are many people who unlock these kinds of devices. I don't believe you can upgrade it to WM 5.0 or beyond, but that may be possible. Search for WM versions that include "unlocked" versions. The best bet is a newer version of PPC 2003.

The process is relatively simple. Once you have your ROM on CD or via download, You run it with your device hooked up to your PC via cable/cradle and connected via ActiveSync (3.7 or later). The warning is an improper ROM load could make your device unusable. It is a risk you have to take if you want it to make calls. Toss up: no phone Pocket PC, pocket PC phone, or shiny brick. If the XDA site has recommendations on a ROM source, they are not likely to steer you wrong. They will state emphatically, that you do not want any interruptions in the ROM upgrade process. If you have a power outage or something shuts off for any reason, you will have the shiny brick and be looking for a new device.

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Freezed SX66 at the initiation Windows page


Hi there,

This could be an internal problem on the device, cause of instant shock cause of dropping it. You better try to remove the battery for a while to reset and restore the system.

If the above recommendation did not solve the issue, try to remove the memory card, if still not working try to update the firmware of your unit.

Let me know here again for the update.

micro

Jul 19, 2009 | Siemens SX66

1 Answer

Sx66 got wet. now acting spastic!!!! Did I kill it?


Yup....and I sell em. Love em. Bobzmailroom@yahoo.com

Jun 24, 2009 | Siemens SX66

1 Answer

Screen says USB or Serial on top and v2. 07 at the bottom


Open the Back Cover.. remove the Battery, Simcard, Memory Card and then leave it open for 1 minute.
Put the battery back, start your device then if you get the same message you need to update the firmware...
In the worst scenarios, your Siemens SX66 has a corrupt ROM and need to be fixed as in "Hardware"... which can be done by a Siemes expert.

Good Luck

May 23, 2008 | Siemens SX66

1 Answer

Siemen sx66 my back light out


I don't have an SX66. I have an SX56, but have you tried holding down the power button for several seconds while it is still on? With the SX56 that "toggles" the backlight display. You could also try settings for the backlight in the menus. Otherwise, the backlight may be dead. Best bet is to purchase a new or used one on ebay or other location.

Mar 16, 2008 | Siemens SX66

2 Answers

WiFi


Go to Configure Wireless Networks
select the wireless after say connected doble click that connection when open the another screen with network name verify you network name is correct, in Connects To: verify select The internet. In the next tab select you Authentication and Data encrypted as you have in your router. and type your network key. select ok. Verify en the next tab if your select USe 1EE... and select EAP typel, select ok. Verify do you have W up in your PDA.
Lucky

Mar 07, 2008 | Siemens SX66

1 Answer

WM6 for T830 Pocket Loox


Still BETA but WM6:

http://forum.xda-developers.com/showthread.php?t=336328

Dec 04, 2007 | Fujitsu Siemens Pocket LOOX T830...

1 Answer

Sx66 to tmobile


As I understand it, the SIM card is what tells your wireless unit which service provider to use. If you have an old phone, it should be an easy matter to take the t-mobile SIM card out of it and install it in the SX-66. One note on the SX-66: the SIM card on mine had a tendency to lose contact (and my contacts would disappear) from jarring until I put a piece of scotch tape across the bottom of it. No problems after that.

Nov 29, 2007 | Siemens SX66

2 Answers

Help me


Check hard reset. Turn off your pda and hold on the turn on button as same time you make you normal reset.
Lucky

Nov 26, 2007 | Siemens SX66

1 Answer

VERY WEEK NETWORK IMEAN SIGNAL VERY LOW


Network signal strength is not based on your phone. It is based on the network. Poor sigal is their problem, Call them. If this rates as helpful, please post as such.TY

Sep 11, 2007 | Siemens SX66

Not finding what you are looking for?
Siemens SX66 Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...