Question about Zanussi 24 in. DE6744 Free-Standing Dishwasher

1 Answer

HOTPOINT FDW60P DISHWASHER

THE DISHWASHER SPRUNG A LEEK IN THE WASTE HOSE AND TRIPPED THE ELECTRIC AS IT IS SUPPOSED TO I REPLACED THE HOSE DRIED OUT THE DISHWASHER NOW WHEN IT STARTS IT PUMPS OUT STARTS TO FILL WITH WATER AND THEN TRIPS THE ELECTRIC, I CAN FIND NO LEAKS, IF I DRAIN THE WATER AND RESET IT IT DOES THE SAME

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,036 Answers

There is usually a float switch inside the DW body. Usually a polystyrene lump. This may be stuck in the up position, or a pool of water may still exist within the case.

When you say trips the electric - is this your wall MCB or ELCB ? If it is that then there is a major electrical fault on this machine that needs investigation.

Posted on Jun 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After drying there is water in filter trap is this normal


IF THE WATER IN PORTABLE DISHWASHER AT THE BOTTOM IS MORE THAN THE DRAIN HOSE FULL OF WATER THEN ASK WARRANTY PEOPLE. WHEN PUMPING WATER UP IT CAN ONLY PUMP SO MUCH WATER OUT OF HOSE BEFORE THE WATER DRAINS BACK INTO DISHWASHER.-- HOPE THIS HELPS

Mar 08, 2010 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

I have a miele G646 dishwasher whihs has sprung a leak into the bottom tray. Have dried it up and reset float switch but the water seems to be coming from a pipe on the left hand side of the machine. i...


Hello,
It sounds like the leak is coming from the water intake hose.
The water intake house is located at the bottom sump of the dishwasher. To get to it the dishwasher has to be taken out and put on its back and the floor plan needs to come off. The intake hose runs from the inlet valve under your sink and attaches to the sump with a metal keeper. Overtime the part of the hose where the keeper is cracks (Normal wear and tear). As I recall the intake hose runs approx. $129.99 from Miele direct. It comes with an inlet valve on the hose. there is no separate or substitute hose you can use.

Good luck

Sep 12, 2009 | Miele Incognito G858SCVi Built-in...

1 Answer

FDW60P dishwasher. Hotpoint Aquarius Control panel not working


I phoned Hotpoint. Was told to switch everything off and take the plug out for ten minutes - I didnt do that before, I just plugged it straight back in. I did this and was able to run the machine during the night on the programme I wanted. At least if it happens again I know what to do.. This solution will cost you nothing.

Jun 11, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Sprung the door now it won't close was emptying it and tripped over a dog


You probably need a new dishwaher. I have seen a few sprung door hinges repaired which worked OK, but most still leak after a costly repair. Your call and good luck. Ken

Apr 06, 2009 | Maytag PDB3600A Built-in Dishwasher

1 Answer

Location of element


Hi, Hotpoint FDW60 got a concealled element.
You need to unplug and disconnect the dw, lay it flat on its back and remove the bottom tray (depending on the final letter for your model (FDW60G, FDW60P, FDW60T) you might need to remove the side panels and kickboard to release the bottom tray). Carefull with the floater switch. You should be able to locate the element straight away. Replace it and reverse the process.
Cheers

Feb 09, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint dishwasher fdw60


the fault wasn't with the machine. we got new waste pipes put in and the conection for the dishwasher hose didn't have the hole for the water to release. thank you for your help

Jul 15, 2008 | Hotpoint Dishwashers

1 Answer

Hotpoint dishwasher


Did you have a dishwasher before? If so, you must have had a sink tail piece with a dishwasher drain coming off the side. For the connection, you may have to get an adapter to fit the end of the dishwasher drain hose to the sink tail piece. Take all pieces to hardware store if necessary to get an adapter which fits. After you connect the drain hose, make sure that the drain hose has a "high loop", meaning that the hose curls up at least 6 inches above the connection point before it goes down again. This is important to keep sink waste from getting back into the diswasher hose if the sink drain backs up.

Feb 14, 2008 | Dishwashers

2 Answers

Hotpoint Ultima dishwasher dwf70


Press and hold the start and the on/off buttons together. It should come out of demo mode.

Aug 25, 2007 | Hotpoint 24 in. FDW60 Free-standing...

3 Answers

Hotpoint Ultima dishwasher DF32


you are probably plumbed in under the sink for the drain hose. a common problem is water coming back down the drain hose when you empty the sink. if so take the drain hose up as far as possible in a swan neck. other possibility is a leaking fill valve

Jan 26, 2007 | Hotpoint 24 in. DWF32P Free-standing...

Not finding what you are looking for?
Zanussi 24 in. DE6744 Free-Standing Dishwasher Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Owen Barnes

Level 3 Expert

835 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...