Question about Sony KP-51HW40 51" Rear Projection Television

1 Answer

Code 4 ???

I have a Sony KP-57HW40 and have the same problem. After a storm, it has a blue screen and shuts off with the the continuous series of six flashes from the red standby light. What is code 4? Is this done when the set is in service mode?

Posted by on

  • 1 more comment 
  • Anonymous Aug 04, 2008

    turning it on and off and also leaving it on to see if it just needs to warm up.

  • MICHELALJ Aug 08, 2008

    SAME PROBLEM AS YOU SHOULD I FIX IT OR NOT IS IT WORTH IT.

  • mbzmiami Aug 09, 2008

    I HAVE THE SAME BLUE SCREEN AND THAN IT SHUTS OFF, HELP ME PLEASE

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 30 Answers

I beleive a code 4 is a dead body but your problem sounds like a dead power supply.

Usually after a storm huh....LIGHTENING, bad power surge.....its power supply related.....

Posted on Aug 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sony kds-60A2020 with no sound or picture two green and 7 red errors code


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 12, 2017 | Sony Televison & Video

2 Answers

I have a Sony kds-60A2020 with no sound or picture but what I get at firs on power on is 2 green blinks and then 7 red blinks


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Jan 12, 2017 | Sony KDS-60A2020

1 Answer

I have a 60 inch sony tv that have a red flashing on the lower left side,no picture when I turn it on and there is ringing sound.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sony Televison & Video

1 Answer

Sony TV question. Lightning surge, no lights, no picture, fuse is good.I have the model number. looking at back of tv now, cover removed.


YOUR GONNA NEED A NEW TV ITS FRIED IT WHEN ITS STORMING YOURE SUPPOSED TO UNPLUG ALL ELECTRONICS BECAUSE OF THAT ISSUE

Jan 09, 2017 | Sony Televison & Video

1 Answer

I need a registration code for my KDL 40BX420 SONY TV


You need to contact Sony for this, this website doesn't any such code available.

Jan 08, 2017 | Sony Televison & Video

1 Answer

Sony c635 will not play continues Schaffer all disk will play single disc only what is the problem


One of the lovable boyfriend present ideas that we like is usually to consider a snapshot of you in a fairly racy pose and following that have it made into a mouse pad. Mouse Pads Choosing The Best Pad For Your Computing Needs AmanStino

Dec 29, 2016 | Sony Televison & Video

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

How can I fix blue dots on my Sony TV screen?


Seems like a problem with a lot of Sony TV's. Wish i could be of more help, but check this site. Your not alone! Sony LCD Rear Projection TV Problems hope this helps!

May 23, 2014 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

2 Answers

Akai PDP4206EA lost tuner and video inputs


Mine died after a brown out. It turned out to be the main board. They're pretty hard to find.

JE

Aug 14, 2009 | Akai PDP4206EA Television

Not finding what you are looking for?
Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

100243 Answers

The Knight
The Knight

Level 3 Expert

71006 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...