Question about Nakamichi CD-45Z CD Player

1 Answer

Need a Nak CD-45Z wiring harness, or diagram

I just got a used CD-45Z in excellent condition. However, it didn't come with the factory 14 pin wiring harness that plugs into the back of the head unit.

Does anyone know where I can get a replacement, or have a schematic that shows which wires go to which pins?

Thanks.

- Rob

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Rob, I had the exact same problem, I kept searching on line and came upon Alex in Australia, he deals in Nakamichi products, and has the part (plug/wiring harness). He charges $55 for the part and $30 for express shipping.

Here's his email: aminassian@optusnet.com.au

I have also found a site with the Manual: http://www.nakremotes.com/default.htm
Click on "Model List" and look for your model, in the manual there's the wire color code for the pinout. I also have the pinout by wire color, no room to include, will send in another response.

TOP
/-------------------------\
[ 1 2 3 4 5 6 7 ] Looking @ pins in socket
[ 8 9 10 11 12 13 14 ] Naka CD45-Z deck
Note: The above diagram is done from the perspective of looking directly on to the connector pins. If you are having trouble figuring out which way is which, just use the ground wire, which is always black, as a reference for making sure you are doing the pins correctly.


Posted on Jan 26, 2009

  • mauichuck Jan 26, 2009


    1. Blue = Remote (for swittching input for amp battery

    2. Tellow = Battery (Main Power)

    3. Red = ACC (attach to ignition accessory)

    4. Grey/blk = Frt R Spkr (-)

    5. Grey = Frt R Spkr (+)

    6. Purple/blk = Rear R Spkr (-)

    7. Purple = Rear R Spkr (+)

    8. Black = Ground (neg)

    9. blank (not assigned)

    10. Blue = Power Attenna

    11. White/blk = Frt L Spkr (-)

    12. White = Frt L Spkr (+)

    13. Green/blk = Rear L Spkr (-)

    14. Green = Rear L Spkr (+)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing rav4 factorie sterio 2004 with a new 2015 jvc sterio system


Use a harness adapter if you haven't cut the factory wiring plug in the car. If you have go to www.modifiedlife.com. they have an excellent resource page with wiring diagrams

Jul 30, 2016 | Cars & Trucks

1 Answer

I have a misubishi cd and casette player out of a jeep model #P04704383AD date code 3447 supplier28046 serial #T00AM3447B0509 I need the wiring diagram its doing into a ford explorer


The easist way to install it ,Is to get a wireing kit from a car audio supply store for your ford, As long as the radio harrness isn,t cut off you can get a wireing kit that plugs in to the factory harness, I installed car audio equipment for over 40 years, Untill i retired this summer, End a llways use a kit,If some one didn,t cut the harness of, If they did cut the factory harness off,I would go end get one from a auto wrecker ,End put it in all so. It makes it a hake of a lot (Easier) to install, Hope this hels you out,

Nov 08, 2012 | Audio Players & Recorders

1 Answer

Trying to install after market cd player in freightliner. need wiring diagram or wiring harness adapter. model # 12244075


i have got the same problem. took out factory stereo out of my 2005 m2 106. only to find all wires to be gray with no markings. it has a 12 pin connector. can anyone tell me the how to hook-up new regular 10 wire cd player

Aug 24, 2010 | Car Audio & Video

1 Answer

HORN DIAGRAM FOR A DODGE RAM 1500 (CONNECTIONS)


Battery Constant 12v+ Positive Wire (+): Black/Orange And Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Blue (16 Gauge)
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Yellow/Red
Second Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Blue (10 Gauge)
Accessory Positive Wire Location: Ignition Switch Harness
Second Accessory Positive Wire (+): Orange
Second Accessory Positive Wire Location: Ignition Switch Harness
Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Positive Wire (+): Orange/Violet
Power Door Lock Positive Wire Location: In Drivers Kick Panel, White 6-Pin
Power Door Unlock Positive Wire (+): Pink/Violet
Power Door Unlock Positive Wire Location: In Drivers Kick Panel, White 12-Pin
Door Trigger Negative Wire (-): Yellow
Door Trigger Negative Wire Location: At Headlight Switch
Domelight Supervision Wire: Use Door Trigger (Requires Relay)
Domelight Supervision Wire Location: N/A
Horn Negative Wire (-): Black/Red
Horn Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Gray
Tachometer Wire Negative Wire Location: At PCM, Connector 1, Pin A7. The PCM (powertrain control module) is located on the firewall next to the wiper motor.
Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Black/Orange (To disarm requires a (-) negative through a 1565 ohm resistor and an extra relay to connect.)
Factory Alarm Disarm Wire Location: In Drivers Kick Panel, White 12 Pin Plug
Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A

Aug 22, 2009 | 1998 Dodge Ram 3500 2WD

2 Answers

2002 jetta tdi died while shifting into 4th gear


Sorry, not a solution to this car but your other vw 1989 jetta...only way I could get hold of you.

here is your diagram

The following information covers electrical connections and plugs to the rear of the fuse/relay panel. It completes and supplements the information in the appropriate Service or Repair Manual for the fuse/relay panel section and should be used in conjunction with the wiring diagram for the vehicle or system in question. Volkswagen part numbers shown here may or may not match those on your panel, however, if you panel visually matches the diagram, it is correct for your application.
Fuse/Relay Panel - Rear Connections (Volkswagen Part Number 171 941 821 D) clear.gif
97-3228.gif
Connections and plugs on rear of fuse/relay panel:
A Blue 28 pin Instrument cluster wiring harness B Red 28 pin Instrument cluster wiring harness (position 5 open) C Yellow 22 pin Engine compartment/engine management, left side (position 10 open) D White 29 pin Engine compartment/wiper motor wiring harness, right side (position 6. 10, 14, 18, 27, 28 open) E Black 18 pin Rear wiring harness (position 17 open) G n/a 1 pin 10 individual circuits H Brown 6 pin Air conditioning/coolant fan relay wiring harness K Neutral 5 pin Seat belt warning system/coolant level wiring harness L Grey 4 pin Horn wiring harness L Black 4 pin Headlight/dimmer switch wiring harness M Black 2 pin Steering column switch wiring harness M Black 2 pin Headlight/dimmer switch wiring harness N Red 1 pin Separately fused circuits (glow plug wiring harness) P Red 7 pin 7 single point connectors for terminal 30 circuit R Green 2 pin Open/ECM power supply relay
Note: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market. Always consult appropriate wiring diagram for specific terminal assignments.

hope this has resolved your problem

Thankyou

Aug 15, 2009 | 2003 Volkswagen Jetta TDI

2 Answers

I need a wiring diagram for this stereo


FOR 16-PIN HARNESS
Pin Number Wire Color Function 1 White Left Front (+) 2 Green Left Rear (+) 3 Violet Right Rear (+) 4 Grey Right Front (+) 5 Blue/White Amplifier Remote 6 Blue Antenna Remote 7 Red Accessory 12 Volts 8 Black Ground 9 White/Black Left Front (-) 10 Green/Black Left Rear (-) 11 Violet/Black Right Rear (-) 12 Grey/Black Right Front (-) 13 Sky Blue Telephone Mute 14 Orange/White Illumination 15 Not Used Not Used 16 Yellow Constant 12 Volts

FOR 9-PIN HARNESS
Pin Number Wire Color Function 1 Not Used Not Used 2 Black Ground 3 Grey Right Positive 4 Grey/Black Right Negative 5 Blue/White Amplifier Remote 6 Red 12 Volt Switched 7 Yellow 12 Volt Constant 8 White Left Positive 9 White/Black Left Negative
MAY THIS HELP YOU

Jul 04, 2009 | Sony CDX-GT210 CD Player

1 Answer

Need diagram for 2007 escape audiophile


if it is the wiring diagram for the Escape you need, here it is:

12 VOLT CONSTANT Connect to BATTERY ONLY STARTER TAN/LIGHT BLUE (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 LIGHT GREEN/PURPLE (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 BLACK/LIGHT GREEN (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 N/A KEYSENSE N/A PARKING LIGHTS ( - ) WHITE/BLACK (-) @ SJB, Connector E, Pin 4, See NOTE *1 PARKING LIGHTS ( + ) BROWN (+) @ SJB, Connector C, Pin 19, See NOTE *1 POWER LOCK PINK/WHITE (1-Wire System) See NOTE *2 @ SJB, Connector D, Pin 22, See NOTE *1 POWER UNLOCK Same wire, See NOTE *2 See DIAGRAMS DOOR TRIGGER PINK (-) @ SJB, Connector C, Pin 28, See NOTE *1 DOMELIGHT SUPERVISION USE DOOR TRIGGER TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN YELLOW/LIGHT GREEN (-) @ SJB, Connector A, Pin 14, See NOTE *1 TACH NOT RED or WHITE/RED @ IGNITION COIL or FUEL INJECTOR WAIT TO START LIGHT N/A BRAKE LIGHT GREEN (+) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM DARK BLUE/LIGHT GREEN (-) @ SJB, Connector D, Pin 3, See NOTE *1 ANTI-THEFT FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM TRANSPONDER @ IGNITION SWITCH TUMBLER EXTRA INFORMATION NOTE *1 The SJB (Smart Junction Block) is the FUSE/RELAY BOX on the PASSENGER SIDE of the CENTER CONSOLE. NOTE *2 This vehicle uses a 1-Wire Door Locking System, LOCK requires a (-)Negative thru a 1000 Ohm Resistor and UNLOCK requires a straight (-)Negative

Jan 06, 2009 | 2005 Ford Escape

2 Answers

Problems with wiring schematic when replacing a factory stereo


Do you have the harness adaptors? it is best to use these rather than cutting harness. you can swap factory radio back in at later date and they will tell you the wiring ,if not i will try and locate the diagram for you

Dec 12, 2008 | Sony XR-C7350X Cassette Player

1 Answer

NAKAMICHI CD 45Z


If you are using the speaker out wiring (not RCA) then disconnect all speaker wires. connect only one speaker or use a known good test speaker. Try each of the 4 speaker outputs. If none still do not work, then it sounds like a blown output chip which will need to be replaced.

Oct 27, 2008 | Nakamichi CD-45Z CD Player

2 Answers

Nakamichi cd45z


The CD45z does not play MP3's ....Nak is about SQ ...since MP3's are poor quality ...this doesn't fit with what Nak is about.

Mar 03, 2008 | Nakamichi CD-45Z CD Player

Not finding what you are looking for?
Nakamichi CD-45Z CD Player Logo

1,385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nakamichi Car Audio & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

xxxxxx xxx

Level 3 Expert

4807 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you a Nakamichi Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...