Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

I get a F and H code. What does that mean?

I get and f and H code. What does that mean?

Posted by on

  • sweintraub Jun 11, 2008

    Machine starts as usual but just into the filling, it stops and F H code appears on display. However, if I limit the type of load to hand wash or delicate, it will work fine - no codes.

  • Lynjo47 Jun 12, 2008

    Hello! We are having the same problem with our machine. We get an "H52" code and the thing sounds like it is straining to word when filling and draining. I ti will stop mid wash and we have a hard time turing it off. Any ideas would be helpful, my husband is not very handy but if we know where to trouble shoot it will help! Thank you!

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

Please click on the following link for a detailed explanation of the "FH" error code.

http://www.fixya.com/support/r615354-fh_error_code_whirlpool_duet_kenmore

It is rather involved, but it's easier to rule out the simple things first. Check for a siphoning issue, first, followed by the dran pump. In most cases this is a simple problem. If the problem goes beyond that, please let me know and I will give you further advice if needed. I hope this helps you.

Posted on Jun 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My whirpool duet front loading washer has been working all afternoon, now all of a sudden on the last wash it's flashing an F and a K on the timer part. What does that mean??

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the E3 code mean on the 540 model and is there a fix?


Troubleshooting the "E3" error code in Maytag MAH6700 ...

fixitnow.com/.../troubleshooting-the-e3-error-code-in-maytag-mah6700-...
Feb 20, 2011 - These codes in your (made-by-Samsung) Maytag washer might pop up during the ... In fact, the E3 error code means that the Machine Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.... MAH6700 and MAH8700 models (they use the same motor).

I have a samsung frontload washing machine. A code E3 is ...

www.shopyourway.com > Denise LaGrasse > Questions
Mar 15, 2014 - My samsung front loader is not working. do not no what E3 means. ...code F26 mean on a Kenmore Elite model 110.4708 washing machine?

How To Fix 3E Error Code On A Samsung Washing Machine

www.appliancerepairlesson.com/.../how-to-fix-3e-error-code-on-a-samsu...
May 15, 2015 - Samsung uses the 3E error code to indicate a drive motor tach fault. ...If you're handy, you can fix your Samsung front load washing machine error code ....My samsung frontload washer shows e3 and the drum does not turn ...

Jan 06, 2016 | Washing Machines

1 Answer

What does code pf and code nd mean on my amana front load washer mean


PF means power failure and ND means that it did not drain and still has water in it.

Jul 06, 2015 | Amana Washing Machines

1 Answer

Fault code 240 w2hat does that mean


check in the manual for the error code most of washing machine if the error code is in users manual its means its only minor problem,but if the error code is not in users manual its means you need to call an service technician to not waste your money or time if you do by your self.

Nov 01, 2013 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Wondering what code F-- means on cabrio whirlpool topload mod. wtw66005w2 Thank You


Is there a number after the F code?

Thats ok heres what the code means: Whirlpool Cabrio Washer Fault Codes.

Means primary control failure and to resolve this you'll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part.

Hope helps.

Aug 03, 2011 | Washing Machines

1 Answer

Error code 51? F & F intuitive washer


Hi just read your posting.Error code 51 means you have a Recirculation Fault.This means while the machine is filling or washing it loses water.Error code 37 means you have Pump Block error which means the machine is not draining.Please look under the machine to the front right and you should see a pump with a red or black fan attached.Can you confirm this please? I think there is a problem with your diverter valve and the information on your type of pump will help me rectify this problem for you.Please reply with additional information on the type of pump in your machine.Looking forward to your reply.

Jul 01, 2010 | Fisher and Paykel Washing Machines

1 Answer

LG CODE tcL. What does it mean?


I got the same code - I contacted LG. They have 24 hour customer service available at 800-243-0000 and my call was answered immediately. The code means "top clean load" and is not an error. You have run enough cycles and the washer is asking you to run a cycle with no clothes, and bleach only.

Apr 25, 2010 | LG WM1814CW Front Load Washer

3 Answers

Error codes


Hello,
Here are the common error codes for the LG machines.

LG Washing Machine Error or Fault Codes

If you have a LG Washing Machine you may see an error code come up and wonder what it is. Here are the common error or fault codes that will be displayed on the LG machine.

OE

This means that the washer has tried for ten minutes to drain the water out of your machine and the water did not drain out.

UE

This means that the load in the drum is out of balance causing excessive vibration when spinning.

IE

This means that the washer has not filled with water in 8 minutes.

LE

This means that the motor and the control panel are not talking to each other properly

PF

Power Failure – The power has gone out to the machine and then has come back on

FE

This means that there is too much water in the machine

PE

This means that the water level sensor is not working properly

CE

The washer motor has received and over current condition

TE

This means that your heating sensor is not working properly

SE

This means that you had a temporary sensor error

HE

This means that you had a temporary heater problem

DHE

This means that you had a temporary dry heater problem

This will give you a basic idea of what has caused your error code.


Heatman101

Mar 15, 2010 | LG WM2277H Front Load Washer

1 Answer

Display error code of Lr on control panel


L means "Lid or Door Lock" problem
r probably means 'release' I couldn't find it anywhere... so I'd guess that Lr means the machine did not detect that the Lid Lock released and cycle end (which means either the sensor is bad or the Lid Lock dosen't lock the Lid).

Either way, something with the Lid Lock system ais not right. Be glad it releases ;-)

Mar 27, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Code E36 and Code E68


hello e36 means control board problem E68 means current leakage to ground on heater or fuse opened

shaun

Jan 12, 2009 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...