Question about Office Equipment & Supplies
I would like to know where I can buy new absorber Foam Pads.
I unsubscribed befor I read all your E mais, cause I thought it was a wast of Money, but after reading all your Mail I found you really do have good information.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 23, 2013 | Canon MultiPASS MP730 All-In-One InkJet...
Aug 01, 2008 | Canon Office Equipment & Supplies
There are two possible ways to remove the error from your printer. First is to actually clean the absorber pads that are full of waste ink. The second is to reset the printer to clear the error and let the printer print again.
Clean the two absorber pads. There are actually two absorber pads located on the right side of the printer, under the ink cartridges when the carrier is in the home position.
Accessing the pads and remove them for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezers and extra cloth for some ink spillage. Using the tweezers, lift up the pads sitting on the rubber retainer. The pads can be easily clean by placing them under running water. Use warm water to remove the ink from the pads. Dry the pads and reinstall them. Same procedure if you are installing new pads.
However, the problem will not be solve especially if you are currently facing the waste ink absorber full error or E-27.
Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220
1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on
3. hold the Power button, release Resume Button.
4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.
5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again
Please rate this solution. Let me know if you have any more questions. Thanks.
May 30, 2011 | Canon PIXMA MP210 Photo All-In-One Printer
Oct 01, 2010 | Canon PIXMA iP8500 InkJet Photo Printer
Aug 18, 2010 | Canon PIXMA MP160 All-In-One InkJet...
Aug 17, 2010 | Canon PIXMA MP150 All-In-One InkJet...
Apr 06, 2010 | Canon PIXMA MP130 All-In-One InkJet...
Jan 11, 2010 | Canon PIXMA MP130 All-In-One InkJet...
Jan 20, 2009 | Canon PIXMA MP150 All-In-One InkJet...
419 people viewed this question
Usually answered in minutes!