I need to now how to load tubing in this greenlee hydraulic bender.

There are several videos on the Internet on how to use this equipment, but they do not replace a manual (which I could not find.)

Recommend contacting the company here for assistance: http://www.metalprocorp.com/US-Manufacturer-Pipe-Bending-Machines

1) Take it to a muffler shop unless you are a good welder.
2) Procure the new exhaust pipe material.
3) Make the necessary bends in the new pipe to correspond with the layout of the old pipe with a hydraulic tubing bender.
4) Use a band saw to cut the new pipe to lengths using the old pipe as a template.
5) Weld the pieces to form the crossover.
6) Using a cutting torch, cut both exhaust pipes to the length you made the crossover.
7) Weld in the new crossover you just made.
8) If you can't weld with a torch, have no access to a tubing bender and have no way to get the correct exhaust pipe material....take the car to a muffler shop.

go on web to the manufacturer and find the parts catalogue and down load it from there.

767 hyd pump needs oil added no pressure

Go to this link, it is best to have the company do it. They have the right size seals.
http://www.greenlee.com/servicecentersstate.shtml

where are put the oil, in my 767 hydraulic hand pump, knockout punch..

Hi, I have a couple of phone numbers for you to call, toll free. This place deals with all kinds of electrical tool and benders, and Greenlee is first on there list for conduit benders. I am sure they can answer your question to solve this problem. Don't let the name throw you.How to wire a house .com, 1-8779473 or 631-920-6411. They do deal with many Greenlee benders, and they ask you to call if you need information on a product. So, please do, and let me know the out come. Please don't forget to rate me on this! :))
Sincerely,
Shastalaker7
A/C, Heating, & Commercial Refrigeration Contractor.

Go to http://www.pipeandtubemachines.co.uk/ or phone 07740868213 we can e-mail the manual over to you or post it. await your reply. we supply new and used ercolina tube benders, spares and tooling, fein pipe and tube notchers, mandrel benders, feal rebar bending machines. visit the e-shop anything not there we will be happy to quote.

YOU CAN GET FROM THEM

2 "u" cup seals need to be changed in the reserve tube