Question about Computers & Internet

1 Answer

DLL Install Conflicts

AG-225Hv2.exe Illegal System DLL Relocation OS - XP 32 The system DLL user32.dll was relocated in memory.The application will not run properly.The relocation occured because the DLL C:\windows\system32\HHCTRL.OCX occupied address range reserved for windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. Failed to load control ?SocketXCtl? from SocketX.OCX. Your version of SocketX.OCX may be outdated. Make sure you are using the version of the control that was provided with your application. Regards Cawboye cawboye@gmail.com The system DLL user32.dll was relocated in memory. the application will not run properly. The relocation occurred because the DLL C:WINDOWSsystem32HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL

Posted by on

  • makremsagem Apr 02, 2009

    I have the same message error for windows xp home edition sp3"illegal system DLL relocated"someone can help.Thankx

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Hello,

Sounds like you have a corrupted ActiveX control. Fortunately it is very easy to verify this by locating a folder in your Windows sub folder call Downloaded Program Files. c:\(windows)\Downloaded Program Files\.

Once you open this folder you can right click the ActiveX control entry and select update or in most cases choose Properties to diagnose a problem. When you select Properties, you'll be presented with a popup with three tabs, the dependency tab, when selected, may have a notice that the Control is damaged/broken. If it is, back out and then right click the Control in question and choose Remove. When needed the ActiveX control will download again.

If however, you get this Alert of an attempt to relocate in memory a critical system file then chances are high this ActiveX control is Malware or a Trojan because according to Microsoft programming standards, there is never a reason to change that DLL in question and this is one of many DLLs that have reserved addresses in memory for a reason. It would only be attempting to change that file if you are under attack.

To be certain you are virus/malware/trojan clean go to:
http://www.kaspersky.com/virusscanner

It too will want to download and install an ActiveX control so look for the Alert Bar and you can definetly trust this Control. Once installed it will scan your system using a database at their online site that has not chance of being infected.

If you have any questions, concerns or need for more clarification please don't hesitate to use the comment box below to contact me.

Regards,
Worldvet

Posted on Jun 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i add a wireless dual band usb adaptor for wifi to my xp home edition


yes. System Requirements OS: Windows 7(32/64bits), Windows Vista(32/64bits), Windows XP(32/64bits)
http://www.newegg.com/Product/Product.aspx?Item=N82E16833704135

Oct 15, 2014 | TP-LINK Computers & Internet

1 Answer

Wireless adapter problem


GO http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1310

Dec 30, 2011 | Trendnet TEW-664UB IEEE 802.11a/b/g IEEE...

1 Answer

Entry point apsCreate MIB could not be located in the dynamic link wlanapi.dll


I don't see a question but I assume you are getting this message from your OS when you boot the computer. Uninstall the device shut down the computer and reboot then reinstall the device. This should reload the .dll file that is causing you problems.

Oct 12, 2009 | D-Link Computers & Internet

1 Answer

I have a error each time i start my computer it said.. the procedure entry point apsGetinterface count could not be located in the dynamic link library wlanapi.dll.


this is a wireless lan or router program.. install the program by disable antivirus on your system. Sometimes the program cannot copy to the system due to virus signature of it might your antivirus that file a virus then he remove it automatically. Run the setup on you router or wireless lan on it. Good luck!

Jul 22, 2009 | Computers & Internet

3 Answers

AegisE5.dll was not found.


The file bcmwltry.exe is the tray bar process for the Broadcom Corporation Wireless Network software.

You can try eliminating the program from start up.
Click on Start >>Run, type "msconfig" (without the quotes), then click on OK.

When the System Configuration Utility loads, click on the "Start Up" tab, then scroll down to the "bcmwlt.exe" entry and UNCHECK the box next to it.

Click on Apply, then OK, and the computer will need to be restarted. Do it. Upon restart, you'll see a System Configuration Utility warning. Simply choose the option to stop it from repeatedly opening.

This will be fixing your problem
Have a great day!
Pablo :-)

Oct 22, 2008 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Cesar.pratto@gmail.com


Hi , yes it's a known problem and Microsoft/DLink both has confirmed that.


Please download the updated drivers by clicking on the link. below. AS er your information your router's model no. is the 6th entry on the page.DWL-G630_revE. Download and re-install the drivers.
It will fix the problem

http://support.dlink.com/faq/view.asp?prod_id=3002&orig=1


For more information

http://support.microsoft.com/kb/950720

Jun 05, 2008 | D-Link AirPlus DWL-G630 802.11g/b Wireless...

6 Answers

DWL-G630 WinXP SP3


Hi everyone who upgraded to SP3 or Vista! I just wanted to let you know that I also encountered the same exact problem when upgrading another person's computer, and the answer to your question (which has already been suggested) is to get the updated driver directly from the manufacturer:
http://support.dlink.com/faq/view.asp?prod_id=3002&orig=1

Make sure you click on the driver for your EXACT model number. If you do not have internet connectivity at all on the affected computer, then dowload the driver's zip file to a portable USB memory stick (or CD, or DVD) on another computer and transfer it to the affected computer that way.

Next, unplug the D-Link.

Next, open the Zip file with the driver and run the setup.exe file. It will uninstall the existing installation first. Then you have to RE-click on the setup.exe file to reinstall the correct driver. If it asks you if you wan to use the Windows Zero Configuration Utility, tell it Yes.

This is absolutely the correct answer/solution. No guesswork involved.

-Tha Mp3 Doctor

May 07, 2008 | D-Link AirPlus DWL-G630 802.11g/b Wireless...

2 Answers

DLL Install Conflicts


http://support.microsoft.com/kb/935448/en-us

I had the same issues. This link should give you an update that will help fix the issue.

Sep 22, 2007 | Zyxel AG-225H (AG225H) 802.11a/g/b...

2 Answers

Application won't start up (VIsta)


if you managed to get the driver installed, you should get an option to use either windows wireless management or the software that came with the adapter, you may be able to dissable the cards software and use windows own

Sep 09, 2007 | D-Link AirPlus G DWL-G510 802.11g/b...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98768 Answers

David Payne
David Payne

Level 3 Expert

14065 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...