Question about Canon Printers & Copiers
Plz follow the link
Posted on Jun 11, 2008
This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine.
Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.
Posted on Nov 12, 2008
Try to enter service mode and reset EEPROM:
1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head
Press RESUME 4 times then POWER to execute the command
turn the plug off turn on and all ok
Posted on Jul 30, 2010
Tips for a great answer:
Eight flashes: Waste ink absorber almost full
The printer has a built-in waste ink absorber for the ink used during Print Head cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact a Canon service representative.
Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing will no longer be possible
Jan 11, 2011 | Casio Printers & Copiers
Jan 05, 2010 | Canon SmartBase MP390 All-In-One InkJet...
Dec 17, 2009 | Canon PIXMA MP780 All-In-One InkJet...
Dec 14, 2009 | Canon PIXMA iP2000 InkJet Printer
Dec 10, 2009 | Canon PIXMA iP1500 InkJet Photo Printer
Dec 02, 2009 | Canon PIXMA iP2200 InkJet Photo Printer
Dec 01, 2009 | Canon Printers & Copiers
Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...
119 people viewed this question
Usually answered in minutes!