Disc doesnt spin , the lens dont move up and down , only lights red
Have problem with PS2 slim . Doesnt read disc . I have opened cover ,
replaced the laser , removed the solder. The lens only lights red , no movement . I have replaced the laser , but its the same , lens doesnt move up and down, no spining with disc . Whats wrong ? Thank you .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does this problem apply to ALL of your discs? If not, then first, when putting your discs in the tray, be sure that ALL of the three PINS on the tray that holds the disc are locked in place, meaning they should all be sticking out on the hole of your DVD. This happened to me a lot...heheh...then, if this problem apply to all of your disc, There probably is a problem with the lens of your PS2...either slim or the fat one...then the only solution is to have your lens replaced...sorry, but i don't know how much it cost now...
Well, there is 2 switch. one at the back left of the cd tray and one one the reset /power switch.
both sitch have to be close in order for the disk to spin.
If you try this dont forget to put a disk on the spindle as you will start the laser. this is for your safety.
then, if the disk does not spin, then you can try replacing the laser. or at least verify the ribbon cable that is hook to it. if the ribbon cable is not well inside the plug the laser might move but again the disk won t spin.
it is related to each other, the PS2 seem to verify the laser prior to start the spindle so what ever happend to the laser affect the spindle.
and then, if you buy a new laser lens, don't forget to remove the soldering bridge. it is a small ball that is use to avoid static while shiping the lens.
most of the seller will include a small peace of paper with procedure and also there is web site with picture of this soldering bridge.
I replace some of them, and I have to say that the small plastic lock for the ribbon cable to the lens has been an issue and the soldering bridge another one.
but I got most of the PS2 back and running by replacing the laser.
I hope this will help you.
OK. First of all, put any disc in and turn on the PS2. Push the spot shown here down with something about the size of the TV end of the AV cable. http://i142.photobucket.com/albums/r96/Daiv_The_Goriya/Pushdown.jpg Watch what it does. Does it stop spinning? If so, see this pic http://i142.photobucket.com/albums/r96/Daiv_The_Goriya/PS2problem.jpg
This keeps the disc from spinning when the cover is open.
push this down while following the instructions from the first pic. Does the disc work?
There's usually a small object that pushes #2 down. Chances are it broke off.
ok...well all of you people are just **** him!
the actual problem is that you probably dropped the ps2 and the case lid got a bit lose......
what you have to do (if you dont want to buy a whole ps2 case again) is tap the ps2 on the top of the lid when it goes into the cd browser screen and it will work perfectly fine
just make sure you dont tap i too hard or else we will have another problem...lol!
Sorry about no one paying attention to your problem for so long.
I just got started about a month ago. I have been repairing video Game consoles for over a decade though.
Your problem is that your slim has a melted down laser and lens assembly. The unit is dirty. You will need a new disc drive and a thorough cleaning to get it back in service.
The problem about the power light is due to excessive dust buildup shorting out the components on the motherboard. The video output is also comprimised by dust and dirt.
The disc spinning is possibly comprimised by hair wrapped around the disc drive spindle.
If you want, I can thoroughly detail clean your PS2 slim and replace the disc drive for $38 plus shipping both ways.
is this the big ps2 or slimif the big one does it say disc read eror or something is yes the lens might be dirty so if you want to void the ps2 open it up screws under rubber tabs then open the drive where disc goes then lightly clean the lens with a cloth and try it then
also does this happen with all the games or just one or two