Question about Uniden Phones

Open Question

Hi i want to expand my WDECT 2305

IS THE NEW MODEL COMPATABLE WITH THIS, AS I HAVE NOT BEEN ABLE TO BUY AN ADDITIONAL HANDSET

Posted by on

4 Suggested Answers

SOURCE: re. call waiting

Using Call Waiting
If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will
sound. Press [ /Flash] to accept the waiting call. There is a short pause, and then you will hear the new caller. To
return to the original caller, press [ /Flash].
Note: You must subscribe to Call Waiting service for this feature to operate. Not all features are available in all areas.

Posted on Mar 23, 2008

  • 1 Answer

SOURCE: GE MODEL 28112 DECT 6.0 CORDLESS PHONE

I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Posted on May 30, 2008

mrfixit64857
  • 9 Answers

SOURCE: sync a new handset to kx-tg5632 phone

This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Posted on Jan 01, 2009

  • 1 Answer

SOURCE: Just bought an additional handset

This exact thing happened to me. Same model number. No matter what I did, the new handsets would not register.

The solution? Reset the entire system:
1. On the BASE - Unplug from wall both power and phone line. Unplug battery from base handset.
2. ON the Extension phone - unplug from wall and unplug battery from handset.
3. Wait AT LEAST 5 minutes.
4. Plug back in BASE power.
5. Plug back in BASE phone line.
6. Plug back in EXTENSION handset battery. Don't plug in BASE handset yet.
7. Follow steps to program EXTENSION. When successful:
8. Plug back in BASE handset battery.

Posted on May 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are thee any Binatone handsets compatable as extra handset to add to Binatone symphony 3325 unable to get new handsets but main answering machine and handset are still working


with cordless phones the problem is that the hand sets have to be recognized by the base station ( paired) and unless you have the exact hand piece make and model this pairing and recognition will not happen
if you can get 2nd hand units for the 3325 base then the base will accept them ( any number of additions ) but if the hand piece is different it will not work
you you need extra hand pieces then it may be best to consider a new system where you can buy extra phones and chargers

Jul 13, 2016 | Binatone Phones

4 Answers

Radio shack 43-113 cordless phone


Hi,

Re: "compatible extension hand set"

Have you tried Uniden DXI-986-2 900 MHz Cordless Phone with Dual Handsets and Extra Charging Cradle. You would have to disable the base of the main unit of the Uniden and simply use it as a cradle/charger. Additionally, it may be to your advantage to bring along your Radio Shack Hand set when trying/buying the Uniden to see it they will pair up.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 22, 2008 | Radio Shack 433575 Cordless Phone

1 Answer

Does the digital cordless phone DECT6.0 have a light in the handset?


Has your cordless phone sustained impact or some kind of shock? If that's the case, you can buy a replacement handset that's compatible with your base unit. If it isn't supposed to light up, then that's unavoidable.

Feb 02, 2015 | Emerson DECT 6.0 Expandable Cordless Phone...

1 Answer

Will the vtech interact with already an existing Uniden 5.8 ghz power max base unit and handset plus one additional handset and charger to give me four locations or just two more single handsets with...


Hi there, Your new phones will not interact with a base station from another brand of phones. If you want to use one base station, you can buy single phones of the same model and brand and those will interact with the original base station. Your new phones will not connect to the old base station Sorry, Alex

Jun 03, 2011 | Vtech CS62192 Cordless Phone

1 Answer

I have a GE cord and cordless speaker model: 26955-GE 900mhz phone which i have had for eight year and I would like to add another cordless phone which GE phone is compatible to what I'm currently using....


If you mean you'd like to add another handset to the base unit on this phone, I'm afraid you can't. This isn't a multi-handset phone and isn't expandable. If you want the kind of system that has the main base unit and several separate handsets, you'll have to start fresh with a new system. They aren't expensive.

Mar 09, 2010 | GEH5450 Cordless Phone

1 Answer

Is it possible to buy a power adapter for uniden cordless N32 for the main phone model wdect2355+2 also if available the cost WDECT wideband digital


You can purchase power adapters at this link:
www.lcdpayless.com. On upper left of page search for Uniden wdect power adapter. The price is $9.99.

I found a Uniden wdect 3355+1 (two handsets; one on answering machine and one stand alone). this is a wideband (64kbps-2mbps) phone/ans. mach. It's priced at $149.95 at Yahoo shoping. The wdect2355 that you have apparently is no longer offered.

Please let me know if this is a satisfactory answer.

Master FixYa...saailer@att.net

Dec 06, 2009 | Uniden Cordless Phone

1 Answer

Just bought an additional handset for GE 27951 expandable 6.0 DECT Cordless. I press and hold the Page button for 5 seconds but the new handset will not register. Error keeps occurring "no base."


This exact thing happened to me. Same model number. No matter what I did, the new handsets would not register.

The solution? Reset the entire system:
1. On the BASE - Unplug from wall both power and phone line. Unplug battery from base handset.
2. ON the Extension phone - unplug from wall and unplug battery from handset.
3. Wait AT LEAST 5 minutes.
4. Plug back in BASE power.
5. Plug back in BASE phone line.
6. Plug back in EXTENSION handset battery. Don't plug in BASE handset yet.
7. Follow steps to program EXTENSION. When successful:
8. Plug back in BASE handset battery.

Apr 02, 2008 | Phones

1 Answer

ELBT595 & TCX905 compatibility


from uniden regarding your base station:
"This expandable base system is compatible with Uniden handset models ELX500, TCX400, TCX440, and TCX805. However, only the ELX500 is compatible the base system's Bluetooth and CellLink features."

Feb 09, 2008 | Uniden TCX905 Cordless Expansion Handset

7 Answers

Uniden handset TCX905 with base unit TRU8866-if compatible?


I just successfully registered 4 TCX905s with my TRU8865 base - it's documented in the TCX905 manual.

Be sure the handset you want to register is fully charged.

Remove the handset you want to register from its charger.

Now unplug the AC for the main base, hold down the 'find handset' key on the base and plug the AC in again, when it beeps, you can let go of that button.

Hold down the '#' on the handset you want to register, it will show 'Registering Handset...' and when it beeps, it's done - registered, you're good to go :)

Oct 11, 2007 | Uniden TCX905 Cordless Expansion Handset

Not finding what you are looking for?
Phones Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96576 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...