Question about Acer AL1916B 19" LCD Monitor

1 Answer

Green Flash power only on one computer

Okay, so the Green power button flashes when plugged into my main PC.

when i plug it into my Family PC, it works fine, when i plug it into my EEE Pc, it works fine.

Other monitors work fine in the same computer.

video card still Reads the Monitor Info, AL1916

Monitor does not Flash during Bios, on this computer


Posted by on

  • flushingcomi Jun 11, 2008

    one of the first things i tried. about to try Uninstalling CCC and reinstalling, doubt it will work, and trying an alternate video card tomorrow.

    though any must suggestions would be helpful


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

It sounds like the monitor functions properly and your computer functions properly, but the combination causes a problem. Try making sure the screen resolution on your main computer is set to an acceptable resolution for your monitor - AL1916. Try setting it low to 800x600 and move up from there until it doesn't work anymore. You can change the screen resolution from the Display Settings (right click on the desktop and select Display Settings) window.

Posted on Jun 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kds k917s monitor won't turn on green power light flashes on when plugged in


check the vga cable which get loose connection then the signal from pc not recognized.

Dec 25, 2012 | NEC MultiSync Computer Monitors

1 Answer

Monitor will not stay powered up


It is possible that the monitor is going back into "Sleep mode" meaning it is not detecting a valid signal from whatever device it is plugged into. I would try replacing the cable that is connecting the monitor to the PC or Console. As a trouble shooting step try pulling up the "Menu" on the monitor itself by pressing the "Menu" button on the front panel of the monitor, if this does come up then we can say that the LCD itself is most likely working.

Nov 10, 2012 | HP Compaq WF1907 19 LCD Monitor

1 Answer

My acer x203h monitor will not come out of sleep mode.


Hook a spare monitor to the computer, if okay! the problem is the power supply board, one or capacitors are open leaving in some cases a slight puff at the top. If symptoms are the same for both displays, it means the Video Graphics Card in the computer is defective.

Mar 18, 2012 | Acer X203H bd Monitor

1 Answer

My moniter says no signsl but the windows is working and i checked the moniter to my laptop and it works fine


Believe it or not but theirs an order in witch you should connect up a compute,r but first make sure that there is only 1 VGA port ie (monitor socket) on the back of it. But if theirs 2 then try the other one.
Other than that try this:
Unplug EVERYTHING! even the power leads from the back of the monitor & pc.
1.Press the power button on pc & monitor to flash out any power left in them.
2.plug in & tighten the VGA cable to the pc then to the monitor if required.
3.plug in all other peripherals ie USB / MOUSE / KEYBOARD etc...
4.plug in the power supply to the monitor then the pc.
4.Switch on the power supply to the monitor first then the pc.
5.Switch on the monitor by it's power button then the pc right after it.

Jul 02, 2010 | Acer X193W LCD Monitor

2 Answers

My computer power light flashes on and off but no picture on the screen, the light flashes like the screen is off with brief green light flash in between. I want to know if that is just a problem with the...


Try unplugging te signal cable from the PC and see if it changes in any way, EG. you get a no signal message or anything also try the menu button again. If you get anything on the screen then there is a mismatch between the PC and the monitor, Screen Resolution, Bent pin in the cable or something similar.

Sep 15, 2009 | Dell E151FP 15" Flat Panel LCD Monitor

1 Answer

Hp L1502 LCD blank, LED still flashes


just check ur lcd display cable and try to clean and c it it will cme

May 29, 2009 | Samsung SyncMaster 910T 19" LCD Monitor

1 Answer

Monitor Not Showing A Picture. Light flashes Yellow and Green.


use the onboard graphics instead of a seperate graphics card (if installed) to test the screen.if it still doesn't work then unplug your monitor from the mains supply and plug in again to reset it. i doubt it's your monitor that is the problem though. but look on the back of your pc for another connection for your screen. the onboard graphics connection is normally vertical near your ethernet port and mouse and keyboard inputs.

please rate me and give me a fixya! if it helped.

Apr 05, 2009 | Acer AL1713M 17" LCD Monitor

1 Answer

Sir Help me with my Compaq monitor MV520 it won't turn the power led flashing orange to green continously


it could be th epower supply and it could be the monitor.
power ON button should not flash orange regardless what you do. it should stay green. then orange. not orange to green to orange.
try the monitor on another PC if you can fine one.
the other thing is are the 2 monitor similar (CRT to CRT and LCD to LCD), you can't mix the the two, they will work but need different video driver to function correctly.

Oct 20, 2008 | Compaq MV 540 15" CRT Monitor

2 Answers

Colour changing


I found this on another site:
[QUOTE=numbnutjas]I had the same problem along with lots of others who bought this great prolite monitor.

Whenever you turn the power off for more than five seconds the monitor looses an important bit of info of a hidden menu. Iilyama are not keen on publicizing the fact their monitor has a bug!

Follow these steps very carefully, it might not work the first time but it does work I promise.

Make sure that the moniter power button is off.

Unplug monitor from mains ( the auto exit button should flash red after about five seconds and you hear a popping sound.)

plug monitor back in mains.

hold down + and - on the monitor

now hold down power button on monitor

let go of power when power button when the green led lights up

let go of + and - buttons

wait a few seconds and press menu, a hidden menu will appear in the top right

use the + and - buttons to move the hilighted option over the auto colour option in the menu
push the menu button.


It does work, but if you have any problems: email at : miamoo2038 at hotmail dot co dot uk

Feb 23, 2008 | iiyama ProLite E434S 17" LCD Monitor

1 Answer

Power button flashing green on and off. No Picture


What type of monitor do you have? I need to no if the power supply or cord plugs directly into the LCD Monitor? These questions are important! Please answer these questions, I will be able to give you an answer!

Nov 25, 2007 | Acer AL1916W 19" LCD Monitor

Not finding what you are looking for?
Acer AL1916B 19" LCD Monitor Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

 Elex
Elex

Level 2 Expert

49 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

John Trigg

Level 2 Expert

250 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...